Quick Summary
This 7.4v 1450mAh 30C Stock Tube LiPo Battery is a LiPo battery designed for airsoft AEGs and rear wired Airsoft Replicas that use a stock buffer tube fitment and a Mini Tamiya connector. It is listed as 30C/60C with 43.5A/87A continuous and burst discharge, and it is described as providing approximately 2 minutes of continuous discharge before running flat.
Who It Is Best For
This battery suits players who need a compact LiPo for a stock tube setup and want a common airsoft battery design for rear wired replicas. It is also relevant for buyers who are matching a battery to an AEG that uses a Mini Tamiya connector. Before ordering, it is sensible to check the battery compartment and the replica manual so the fit and minimum discharge requirement are both suitable.
What To Know Before You Buy
This is a LiPo battery, so it should be charged with a LiPo Balance Charger and charged in a fire retardant Safe Charging Bag. It should not be run flat, as that can damage the battery and affect overall charge ability. Fitment matters, so check the dimensions against the battery compartment before buying.
Pros: Compact LiPo format for stock tube use, with Mini Tamiya compatibility and a stated 30C/60C discharge rating.
Cons: You need to confirm compatibility with your replica, charger, and battery compartment before use.
Common Buyer Questions
What type of battery is this?
It is a 7.4v LiPo battery with 1450mAh capacity.
Will it fit a stock tube setup?
It is described as a common airsoft battery design for the stock buffer tube of rear wired Airsoft Replicas, but you should still check the dimensions against your compartment.
What connector does it use?
It is suitable for Airsoft Replicas using a Mini Tamiya battery connector.
Does it need a special charger?
Yes. LiPo batteries must be charged with a LiPo Balance Charger.
Can I run it flat?
No. It should not be run flat, as that can damage the battery and affect overall charge ability.
How long will it last?
It is described as providing approximately 2 minutes of continuous discharge before running flat.
Key Details
| Detail | What it means in use |
|---|---|
| Battery type | LiPo |
| Voltage | 7.4v |
| Capacity | 1450mAh |
| Discharge rating | 30C/60C |
| Continuous and burst discharge | 43.5A continuous and 87A burst |
| Fitment | Stock buffer tube of rear wired Airsoft Replicas |
| Connector | Mini Tamiya |
Final Buying View
If you need a 7.4v LiPo battery for a stock tube airsoft setup, this model gives you a clear compact option with Mini Tamiya compatibility and stated discharge figures. The main thing is to confirm fitment, charging requirements, and replica suitability before ordering. If those details match your setup, it is a straightforward battery choice for your airsoft replica.
