Quick Summary
The AMG8833 IR 8×8 Infrared Thermal Imager Sensor Module is a compact thermal imaging sensor for Raspberry Pi, Arduino, ESP8266 and similar boards. It uses an 8×8 array of infrared heat sensors and returns 64 individual infrared temperature readings over I2C, making it a practical choice for simple thermal imaging and human detection projects.
Who It Is Best For
This is a good fit for makers, hobbyists and tinkerers who want to build a basic thermal camera or temperature sensing project without a large or complex setup. It suits users who are comfortable connecting a sensor module to a microcontroller and working with I2C communication.
What To Know Before You Buy
The module is described as working from 3 to 5V and supporting I2C only. It is listed with a temperature measurement range of 0°C to 80°C and an accuracy of plus or minus 2.5°C. The maximum frame rate is 10Hz.
Pros: Compact 8×8 infrared array with 64 readings and simple I2C connection for small projects.
Cons: It is a basic sensor module rather than a full finished thermal camera, so you should check compatibility with your board and project needs before ordering.
Common Buyer Questions
What does the AMG8833 sensor do?
It reads infrared heat data as an 8×8 array and returns 64 temperature readings over I2C.
Can it be used with Raspberry Pi?
Yes, it is listed for use with Raspberry Pi, Arduino, ESP8266 and similar boards that support I2C.
Does it support only one type of connection?
Yes, it is described as I2C only.
What is the temperature range?
The listed temperature measurement range is 0°C to 80°C.
Is it suitable for human detection?
It is described as suitable for creating a human detector, and it can detect humans from up to 7 metres away.
Key Details
| Detail | What it means in use |
|---|---|
| AMG8833 IR 8×8 infrared thermal imager | A compact sensor module for thermal imaging projects |
| 8×8 array of infrared heat sensors | Returns 64 individual infrared temperature readings |
| I2C support only | Connects through I2C to a compatible board |
| Power supply 3 to 5V | Works with common low voltage project setups |
| Accuracy plus or minus 2.5°C | Provides temperature readings with stated tolerance |
| Temperature range 0°C to 80°C | Suitable for monitoring within this range |
| Maximum frame rate 10Hz | Refreshes readings at up to 10 times per second |
| Human detection up to 7 metres | Listed as able to detect humans at that distance |
Final Buying View
The AMG8833 IR 8×8 Infrared Thermal Imager Sensor Module is a neat choice if you want a compact infrared sensor for a thermal imaging or human detection project. It gives you 64 readings over I2C, works from 3 to 5V, and is intended for boards such as Raspberry Pi and Arduino. If you want a simple sensor module for a maker project, this is a practical option to consider.













