Quick Summary
The BaiWeiDun 7.4V USB charger cable is a LiPo battery charger with an SM-2PIN plug. It is intended for 7.4V LiPo batteries and uses a USB to SM-2PIN connection.
Key stated points include DC 5V 2A input, 7.4V 1000mAh output, and charging indicators with a red light during charging and a green light when fully charged.
Key Details
| Detail | Verified information and buyer relevance |
|---|---|
| Product type | USB charger cable for 7.4V LiPo batteries. |
| Connector | USB to SM-2PIN plug, so the battery connection needs to match this format. |
| Input | DC 5V 2A, which is the power input requirement for the charger. |
| Output | 7.4V 1000mAh, which should be checked against the battery being charged. |
| Protection | Over-voltage, overload and short-circuit protection are stated. |
| Charging indicator | Red light during charging and green light when fully charged. |
What to Compare Before Buying
- Battery voltage: This charger is for 7.4V LiPo batteries, so the battery voltage must match.
- Connector type: Check that your battery uses an SM-2PIN plug.
- Input power: The charger needs DC 5V 2A input, so compare this with the power source you plan to use.
- Charging output: The stated output is 7.4V 1000mAh, which is relevant when matching the charger to the battery.
- Indicators: The red and green lights provide a simple charge-status check while charging.
What Else You May Need
A suitable USB power source that can provide DC 5V 2A is needed for this charger cable to operate as stated.
Before You Decide
Confirm the battery is 7.4V and uses an SM-2PIN plug before choosing this charger cable. Also check that your USB power source matches the stated DC 5V 2A input requirement.










