Quick Summary
This is a 4-piece set of self-adhesive dartboard wall protectors made from felt and cork. It is designed to sit around a standard-size dartboard and help protect the wall behind it, especially on harder surfaces such as cement or brick.
The pieces are 30 cm x 30 cm each and are described as easy to apply with backing adhesive. The tan, natural-wood look gives the surround a simple decorative finish as well as a practical one.
Key Details
| Detail | Verified information and buyer relevance |
|---|---|
| Pack quantity | 4 pieces, so the layout and total coverage depend on how the set is arranged. |
| Product type | Self-adhesive dartboard wall protectors for use around a dartboard. |
| Material | Felt and cork are stated, which gives the surround its lightweight, layered construction. |
| Size | 30 cm x 30 cm per piece, so the available wall area should be checked against the selected arrangement. |
| Colour | Tan, with a natural wood-style appearance. |
| Mounting | Self-adhesive backing for simple application to the wall. |
What to Compare Before Buying
- Pack layout: The set contains 4 pieces, so compare how that arrangement will sit around your dartboard.
- Wall space: Each piece measures 30 cm x 30 cm, so check the available area around the board.
- Surface type: The surround is described for hard surfaces such as cement or brick, so make sure the mounting area is suitable.
- Board size: It is described as suitable for standard-size dartboards, so confirm your board and spacing match that setup.
What Else You May Need
You will still need the dartboard itself. If you are fitting the surround to a wall, check that the surface is clean and suitable for an adhesive-backed product before mounting.
Before You Decide
Confirm the 4-piece format, the 30 cm x 30 cm size of each panel, and whether your dartboard and wall space suit the intended layout. If you are mounting on a hard surface, check that the adhesive backing is the right choice for your setup.











