NUPROL Power – 7.4v LiPo 3300mAh 2S Deans [Rate 30C @ 99A] [Burst 60C @ 198A] – Nunchuck

STATS – LiPo | 7.4v | 3300 mAh | 30C/60C @ 99A/198A (Cont/Burst) – Airsoft AEGs use the “Burst” drift rate to start the motor, and then the “Cont” drift rate to provide continuous discharge (check your owners manual to make sure the battery purchased meets the minimum drift rate (C) of your AEG) – this battery provides approximately 2 minutes of continuous discharge before running flat
LITHIUM POLYMER – LiPo batteries have an excellent size/weight to capacity ratio, allowing you to fire more shots with a smaller battery. LiPo batteries may also be recharged at any charge level without damaging the overall capacity of the battery. LiPo batteries must not be “run-flat”, as this can damage the battery and effect overall charge ability. LiPo batteries MUST be charged with a LiPo Balance Charger. LiPo batteries must All the time be charge in a fire-retardant Secure-Charging-Bag
NUNCHUCK – this battery is split to help find its place in small battery compartments. Commonly fitted inside the buttstock of rear wired Airsoft Replicas where the buffer tube isn’t hollow (example EBB – Electric-Blow-Back AEGs). Also for fitting around the barrel, within the handguard of front wired Airsoft Replicas. All the time check the dimensions of the battery vs the battery compartment to make sure compatability
DEANS (T) – this battery is suitable for Airsoft Replicas the use of a Deans (T) battery connector
QUALITY CONTROL – NP Power batteries are produced at an ISO 9000 Quality Regulate accredited manufacturing plant and shipped at an optimal charge rate of ≥60% to offer protection to against degradation when in transport/ storage