Quick Summary
The PGYTECH Quick Release Plate & Clamp V2 is a camera mounting kit with two clamps and one plate. It is built around an Arca-type quick release setup and gives you a compact way to move the same camera or rig between compatible mounting points.
The set includes side Arca slots and bottom 1/4" and 3/8" threaded holes, so it can connect with a range of compatible supports. The clamp uses a press-to-lock mechanism, and the plate is described as a square design for 4-way installation.
Key Details
| Detail | Verified information and buyer relevance |
|---|---|
| Brand | PGYTECH, for buyers who want to match the correct accessory family. |
| Product type | Quick release plate and clamp kit. |
| Pack contents | Two clamps and one plate, so check the set contents against your mounting plan. |
| Compatibility | Arca-type / Arca-standard support is stated for compatible plates, cages and L-plates. |
| Mounting points | Side Arca slots plus bottom 1/4" and 3/8" threaded holes. |
| Weight | 82 g, a useful check when keeping camera support hardware as light as possible. |
| Maximum load | Up to 10 kg. |
| Operating temperature | -10℃ to 40℃. |
What to Compare Before Buying
- Arca compatibility: This kit is intended for Arca-type use, so compare it with the exact plate, cage, L-plate or tripod head you already own.
- Mounting format: The clamp has side Arca slots and 1/4" and 3/8" threaded holes on the base. Check that these are the fixing points you need.
- Load requirement: The stated limit is up to 10 kg. Compare that with the weight of your camera setup and any attached rig parts.
- Pack contents: The kit includes two clamps and one plate, so make sure that is the right configuration for your setup.
What Is Included
- 2 clamps
- 1 plate
- T8 wrench
Before You Decide
Check that your camera support parts use the right Arca-type format, and confirm the selected setup works with the 1/4" and 3/8" threaded holes if you need base mounting. Also make sure the 2-clamp, 1-plate kit is the configuration you want, and compare the 10 kg limit with your equipment before choosing an offer.
Product-Specific Value-Add Section
If you move between a tripod, slider and stabiliser, this type of kit is useful for planning the order of your mounting points first. Decide which item will stay on the camera or rig, then check where the clamp will sit on each support so the same plate and clamp arrangement can be used consistently across your setup.
The square plate design also means it is worth thinking about orientation before fitting, especially if you swap between different camera rigs and want the plate placement to stay predictable.
