Quick Summary
The sourcing map metal clip pushrod connector linkage is a 4-piece pack for model control linkages. It has a stated total length of 109 mm and an M3 thread, with the threaded section listed at 10 mm.
It is described as a stainless steel connector with a metal clip for joining a servo rod and a control rudder. The stated body diameter is 2.6 mm.
Key Details
| Detail | Verified information and buyer relevance |
|---|---|
| Brand | sourcing map. |
| Product type | Metal clip pushrod connector linkage for model applications. |
| Pack quantity | 4 pieces, so check the quantity you need for your project. |
| Total length | 109 mm / 4.29 inch, which affects overall linkage length. |
| Thread | M3, so the thread size must match your setup. |
| Thread length | 10 mm / 0.39 inch. |
| Body diameter | 2.6 mm / 0.1 inch. |
| Material | 304 stainless steel. |
What to Compare Before Buying
- Thread size: This model uses M3 threading. Compare that with the threaded part required by your servo or linkage setup.
- Length: The stated total length is 109 mm. Check that this suits the linkage run in your model.
- Pack quantity: The pack contains 4 connectors. Make sure that matches how many points you need to connect.
- Body diameter: The body diameter is stated as 2.6 mm. Compare that with the space available in your model assembly.
- Material: It is made from 304 stainless steel, so buyers comparing similar parts should check whether that matches their preference for the build.
Compatibility, Size and Fit
This connector is intended for DIY remote control models, RC airplanes, RC helicopters and related model applications. The main fit check is the M3 thread, along with the stated 109 mm length and 2.6 mm body diameter.
It is also described for use on gear shafts, motor shafts, short support shafts and shaft pocket models. Confirm that your project uses the same threaded size before choosing an offer.
What Else You May Need
For use in a model linkage, you will also need the matching servo rod or control rod arrangement that the connector is meant to join. The threaded size and available space should suit the rest of your assembly.
Before You Decide
Check the M3 thread, the 109 mm length and the 2.6 mm body diameter against your model before choosing this 4-piece pack. It is a connector for linkage work, so the exact thread size and pack quantity are the key points to confirm.










