Quick Summary
The sourcing map Metal Clevis Quick Link is a metal clevis connector with an M2 thread and self locking clip design. It is supplied as a 10 pack and is intended for use with RC helicopters and other DIY model applications such as RC cars, RC airplanes and remote control vehicles.
The stated hole diameter is 2 mm, with a length of 22 mm and a width of 5.4 mm. The silver finish and compact connector format make the exact size and pack quantity the main points to check before choosing this part.
Key Details
| Detail | Verified information and buyer relevance |
|---|---|
| Brand | sourcing map. Useful for matching the exact part family. |
| Product type | Metal clevis quick link. A small connector for model linkage use. |
| Thread | M2 thread. Check this against the linkage or fitting it needs to work with. |
| Hole diameter | 2 mm. This is a key fit check for the intended model setup. |
| Length | 22 mm. Compare this with the space available on the model. |
| Width | 5.4 mm. Useful where connector clearance matters. |
| Colour | Silver. A simple visual check when matching parts. |
| Pack quantity | 10 pieces. Confirm this matches the quantity needed for the build or repair. |
What to Compare Before Buying
- Thread size: The connector uses an M2 thread, so the mating part needs to match.
- Hole diameter: The stated 2 mm hole diameter is the main size detail to check for compatibility with the linkage.
- Overall size: At 22 mm long and 5.4 mm wide, this is a small connector that still needs enough room in the model layout.
- Pack quantity: This pack contains 10 pieces, so compare that with the number of joints or spares you need.
Compatibility, Size and Fit
This clevis is described for RC helicopters and DIY model use, including RC car models, RC airplanes and remote control vehicles. The important fit checks are the M2 thread, the 2 mm hole diameter and the physical size of the connector.
Because model linkage parts vary, the safest approach is to compare the measurements with the exact rod, arm or fitting you plan to use. A visual match alone is not enough for this type of part.
Before You Decide
Check the M2 thread, the 2 mm hole diameter and the 22 mm by 5.4 mm size against your model before choosing an offer. Confirm that a 10 piece pack matches the quantity you need for the build or repair.










