Quick Summary
The sourcing map RC Boat Push Rod set is a 2-piece pack of rod linkages with ball joints for model projects. It is described as a 304 stainless steel lever/push rod set with a stated total length of 48-58 mm, so the key buying check is whether that size range matches your build.
For buyers working on RC boats or other small model applications, the main points to compare are the length range, thread size, hole distance and body diameter. Those dimensions determine whether the parts suit the space and linkage layout you already have.
Key Details
| Detail | Verified information and buyer relevance |
|---|---|
| Pack quantity | 2 pcs. Useful if you need a matched pair or a spare linkage. |
| Material | 304 stainless steel. The product is described with this material. |
| Total length | 48-58 mm. Check this against the space available in your model. |
| Thread rod size | M2 x 25 mm. Confirm this matches your hardware. |
| Length of thread | 10 mm / 0.39 inch. Relevant for how the linkage is adjusted and fitted. |
| Hole distance | 42-52 mm. This matters for linkage geometry. |
| Body diameter | 1.7 mm / 0.07 inch. Compare this with the fitting point in your model. |
What to Compare Before Buying
- Size range: The stated 48-58 mm length is the main fit check for this part.
- Thread specification: Confirm M2 x 25 mm thread size and 10 mm thread length suit your setup.
- Linkage spacing: The 42-52 mm hole distance should suit the geometry of your model.
- Pack quantity: This is a 2-piece pack, so check whether you need one part or two.
Compatibility, Size and Fit
The push rods are described for DIY remote control models, including RC boats, RC cars, RC airplanes and RC helicopters. They are also described for use on gear shafts, motor shafts, short support shafts, shaft pocket models and miniature servos. Exact fit still depends on the measurements of your project, so the stated dimensions are the important reference points.
Before You Decide
Check the 48-58 mm length range, the M2 x 25 mm thread size and the 42-52 mm hole distance against your model before choosing an offer. Confirm that a 2-piece pack is the configuration you need for the build.
