Quick Summary
This is a 200W solar panel set made up of 2 x 100W N-Type monocrystalline panels. The description also refers to 16BB construction, pre-drilled mounting points, 12V use, IP68 protection and stated wind and snow load figures, so those are the main details to check before buying.
If you need a solar panel setup for a 12V system, pay close attention to the panel count, the stated total wattage and the installation space available. The listed compatibility with batteries, charge controllers and portable power stations also makes the exact system match important.
Key Details
| Detail | Verified information and buyer relevance |
|---|---|
| Total output | 200W total, made up of 2 x 100W panels. Check that this suits the power requirement you are planning for. |
| Panel type | N-Type monocrystalline panels. This is the main panel type named for the set. |
| Cell construction | 16BB architecture. This is a key build detail for the panels. |
| System use | 12V use is mentioned. Confirm that the rest of your system matches this setup. |
| Mounting | Pre-drilled mounting points are mentioned, which matters if you are planning a fixed installation. |
| Protection | IP68-rated protective housing is stated for the panel assembly. |
| Load figures | Wind load 2400Pa and snow load 5400Pa are stated. Compare these figures with the intended environment. |
What to Compare Before Buying
- Panel count and output: This set is made up of 2 x 100W panels for a 200W total output. Check whether that format suits your planned layout.
- System match: The panels are described as 12V panels, so confirm that your battery, controller or power station setup is intended for that type of use.
- Installation space: The flat design and mounting points matter if you are fitting the panels to a roof, vehicle or fixed surface.
- Environmental rating: IP68, wind load 2400Pa and snow load 5400Pa are important figures if the panels will be exposed outdoors.
What Else You May Need
Depending on your setup, you may need compatible batteries, an MPPT or PWM charge controller, and the rest of the mounting hardware for the installation.
Before You Decide
Check that you want a 2-panel 200W set rather than a single panel. Confirm the 12V system match, the stated mounting arrangement and the exact equipment you plan to connect before choosing an offer.
