Quick Summary
This is a 3 pack chainsaw chain for a 10 inch bar, with 40 drive links, 3/8" LP pitch and .050" gauge. It is presented as a replacement chain for Bosch and other listed models, so the key buying check is exact fit.
The chain is described as a semi-chisel design. The product description also states that the 10 inch figure refers to the usable cutting length, while the total length is around 14 inch including the non-cutting section. Check that distinction before choosing an offer.
Key Details
| Detail | Verified information and buyer relevance |
|---|---|
| Pack quantity | 3 pack, so confirm you want three chains rather than a single replacement. |
| Bar length | 10 inch bar size stated, with usable cutting length given as 10 inch (25 cm). |
| Pitch | 3/8" LP, which is a key fit check for the saw and bar specification. |
| Gauge | .050" (1.3 mm), another important compatibility point for the correct chain match. |
| Drive links | 40 links, which must match the bar and saw requirement. |
| Chain type | Semi-chisel design. |
| Fit examples | Makita DUC252, DUC254 (91PX), Greenworks G24CS25, Worx WG305E, Black & Decker GKC1825L20 and PS7525 are named examples. |
| Length note | Total length is stated as around 14 inch including the non-cutting section. |
What to Compare Before Buying
- Exact chain specification: Match the pitch, gauge and drive links to your saw and bar requirements. These are the main fit checks for this replacement part.
- Usable cutting length: The stated 10 inch figure refers to the cutting length, not the full overall length. Confirm that this is the measurement you need.
- Pack quantity: This is a 3 pack, so check whether you need one chain or a multi-pack replacement.
- Model compatibility: The named models are useful reference points, but the final check should still be against the exact chain specification for your saw.
Compatibility, Size and Fit
This chain is described for a 10 inch bar and 40 drive links with 3/8" LP pitch and .050" gauge. Those three measurements, together with the usable cutting length, are the main details that decide fit.
Named compatible models include Makita DUC252, DUC254 (91PX), Greenworks G24CS25, Worx WG305E, Black & Decker GKC1825L20 and PS7525. Use those names as a guide, but still confirm the exact chain specification on your own saw or bar before buying.
Before You Decide
Confirm that your saw needs 40 drive links, 3/8" LP pitch and .050" gauge. Check whether you want a 3 pack, and remember that the 10 inch figure refers to the usable cutting length rather than the full overall length. If you are matching by model, compare the exact saw designation before choosing an offer.
