Quick Summary
The ACE 500W ATX power supply has a stated continuous rating of 500W, flat black cables and a 120mm fan rated under 17 dBA. Its listed connectors include a 20+4 pin ATX main connector, a 4+4 pin 12V CPU lead, four SATA connectors and one Molex plug.
Check the power connections, case dimensions and whether the listed outputs suit your system before choosing this unit.
Key Details
| Detail | Product information and buyer relevance |
|---|---|
| Power rating | 500W continuous rating. |
| Efficiency and control | 75 percent efficiency and Power Factor Control are stated. |
| Output rails | +12V at 18A, +3.3V at 30A, +5V at 36A and +5V standby at 2.5A. |
| Connectors | 20+4 pin ATX main, 4+4 pin 12V CPU, four SATA connectors and one Molex plug. |
| Fan | 120mm black fan, stated to run under 17 dBA. |
| Protection and ratings | OVP, UVP and OPP protections; 100,000 hour MTBF rating. These ratings are not a stated service-life guarantee. |
| Size and weight | 150 x 140 x 85mm; 1.11kg. |
| Operating figure | 45 degrees C operation is stated. Check the manual for the conditions that apply. |
What to Compare Before Buying
- Power requirements: Check your system’s requirements against the 500W continuous rating and the listed rail outputs.
- Power connections: Match the motherboard, CPU and drive connections needed by your components to the connector list.
- Physical fit: Compare the 150 x 140 x 85mm dimensions with the space available in your case.
Compatibility, Size and Fit
The unit is described as a standard ATX power supply for standard tower cases. Check the case’s available space and required PSU format rather than relying on the case description alone. Confirm that the connectors and output requirements match the exact motherboard and components being used.
What Is Included
The stated box contents are fixing screws, cable ties and a manual. The black flat cables are described as bending easily behind the motherboard tray, which may help with routing.
What Else You May Need
No mains lead is supplied. Check whether you have the required lead before setup.
Before You Decide
Confirm the case dimensions, required power connections and system power needs. Also account for the separately supplied mains lead and follow the included manual for setup.












