Quick Summary
The ACE 650W ATX power supply has a 120mm fan rated below 17 dBA and flat black cables. Its connections include one 6+2 pin PCIe lead, one 4+4 pin CPU lead and six SATA connectors, so check these against the exact system requirements before choosing it.
Key Details
| Detail | Product information and buyer relevance |
|---|---|
| Rated power | 650W, with 37A on the +12V rail, 32A on +3.3V and 38A on +5V. |
| Input and efficiency | 230VAC input, passive power factor control and 75 percent rated efficiency. |
| Fan | Black 120mm fan rated below 17 dBA. |
| Power connectors | One 6+2 pin PCIe connector and one 4+4 pin 12V CPU lead. |
| Other connectors | One 20+4 pin motherboard lead, six SATA connectors and one 4 pin Molex. |
| Protection and ratings | OVP, UVP and OPP protection; 100,000-hour MTBF figure and operation rated to 45C. |
| Standards | ATX 1.3 and 2.03, and ATX 12V compliant. |
| Weight | 1.65 kg. |
What to Compare Before Buying
- Check the system’s power requirements against the PSU’s 650W rating and the listed rail outputs.
- Confirm the graphics card uses one 6+2 pin PCIe connector. The source specifies a single PCIe lead, so check carefully if the card requires more than one.
- Check the required motherboard, CPU, SATA and Molex connections against the listed connector count.
- Confirm the power input requirements for the intended setup.
Compatibility, Size and Fit
The unit is described as a standard ATX fit for a tower bay, but dimensions and compatible case models are not given. Check the case’s PSU space and the exact motherboard and component connections before selecting it. ATX compliance alone does not confirm fit with every case or compatibility with every system.
What Is Included
The listed box contents are the power supply, cable ties, fixing screws and a printed user manual. The flat cables are black.
Before You Decide
Confirm the required power connections, especially the graphics card’s PCIe plug count, then check the case fit and system power requirements. The single PCIe lead is an important configuration detail for a build or replacement.












