Quick Summary
The AILKIN 1200Mbps WiFi Extender Repeater is a dual band WiFi booster with an Ethernet port and access point mode. It supports 2.4GHz and 5GHz bands, with speeds up to 1200Mbps, and is intended to extend wireless signal coverage from the existing router.
It is also described as a WiFi amplifier with LAN/WAN ports and reset support, so it may suit buyers who want a simple way to add coverage and reconnect the unit when settings need to be cleared.
Who It Is Best For
This repeater is for buyers who want to extend an existing home WiFi signal and who want dual band support, wired port options, and a reset function. It is also relevant if you need coverage in nearby rooms or on upper or lower floors, provided the unit is placed within router signal range.
Key Details
| Detail | Verified information and buyer relevance |
|---|---|
| Brand | AILKIN. |
| Product type | WiFi extender repeater, also described as a WiFi booster and WiFi amplifier. |
| Speed | Up to 1200Mbps, with 5GHz and 2.4GHz dual band support. |
| Ports | Ethernet port and LAN/WAN ports are mentioned, which may matter if you want a wired connection option. |
| Compatibility | Works with any WiFi router, and is described as compatible with WiFi 4, WiFi 5 and WiFi 6. |
| Reset function | Factory settings can be restored by holding the left button for 8 seconds until the power light flashes. |
| Coverage notes | Signal reception is described within a radius of 6 to 10 metres, with coverage extended from 80 square metres to 100 square metres in the stated conditions. |
| Device support | Supports connection of more than 20 wireless devices, according to the product description. |
Why Buyers Choose It
- Dual band 2.4GHz and 5GHz support gives you two WiFi bands to work with when extending an existing signal.
- The Ethernet port and LAN/WAN ports add a wired connection option alongside wireless use.
- The reset function gives a clear way to restore factory settings if you need to reconnect or reconfigure the unit.
- Support for more than 20 wireless devices may suit a shared household setup with several connected devices.
How It Works
- Place the repeater within the router’s WiFi coverage area.
- Connect it to your network, using the relevant WiFi setup method for your router and password.
- Use the reset function if you need to restore factory settings.
- If the unit stops working, unplug it, switch it off for 3 to 5 minutes, then switch it on again.
- If it still does not work, use the reset option again.
Real World Use
The repeater is described for home wireless signal extension, including nearby rooms and neighbouring upper or lower floors. It is also presented as a shared WiFi solution for multiple devices such as iPad, laptop, mobile phone, IP camera, printer and Alexa device.
What To Know Before You Buy
Check that your router signal reaches the place where you plan to install the repeater, because it must be within WiFi coverage to work from that signal source. Confirm whether you want to use the wireless extender function, the access point mode, or the Ethernet port connection option. If you need to reset it later, the left button is held for 8 seconds until the power light flashes.
Common Buyer Questions
Does it work with any router?
Yes, it is described as working with any WiFi router.
Does it support both WiFi bands?
Yes, it supports 2.4GHz and 5GHz dual band WiFi.
How do you reset it?
Hold the left button for 8 seconds until the power light flashes to restore factory settings.
What should I check before placing it?
Make sure the repeater sits within the router’s WiFi coverage area, because it receives its signal from the router.
Final Buying View
This AILKIN repeater is a straightforward option for extending an existing WiFi signal with dual band support, wired port options and a reset function. Review the router compatibility, band choice and placement carefully before ordering so the unit suits your setup.
