Quick Summary
The Apevia ITX-PFC500W is a 500W fully modular power supply in a Mini-ITX/Flex ATX format, also identified as 1U in the product title. It has a 90-264V AC input range and multiple motherboard, CPU, PCIe and drive power connectors. Check the dimensions and connector requirements against the exact PC configuration before choosing it.
Key Details
| Detail | Product information and buyer relevance |
|---|---|
| Type and power | Mini-ITX/Flex ATX power supply; maximum power 500W. |
| Input | Full-range active PFC, 90-264V AC. |
| Connectors | 1 x 20+4-pin main power, 1 x 8-pin 12V (P4+4), 2 x 6+2-pin PCIe, 2 x SATA and 2 x 4-pin Molex. |
| Dimensions | 160 x 73.66 x 35.5 mm (L x W x H); compare with the available PSU space. |
| Cooling | Forced ventilation by a 40 mm dual ball bearing fan. |
| Output ratings | +3.3V at 12A, +5V at 14A, +12V at 33A, -12V at 0.3A and +5Vsb at 2.5A. |
| Listed protections | Overvoltage (OVP), overload (OLP), over current (OCP), heating (OTP) and short circuit (SCP) protection. |
What to Compare Before Buying
Check the PC’s required power connectors against the listed connector types and quantities, including the motherboard, CPU and graphics card connections. Confirm that the system’s power requirements are suitable for a supply rated at a maximum of 500W; the listed output ratings are also provided above.
Compare the 160 x 73.66 x 35.5 mm dimensions and the Mini-ITX/Flex ATX format with the space and PSU format required by the specific case. The product title also describes it as 1U, but that alone does not establish fit in every 1U system.
Compatibility, Size and Fit
Connector names and format are useful checks, but do not establish compatibility with every motherboard, graphics card or case. Confirm the exact system’s connector needs and available PSU dimensions before selecting this model. The listed connectors include two 6+2-pin PCIe plugs and two SATA plugs; check that the number and type meet the planned configuration.
Setup and Correct Use
The product instructions state that connecting the power cord to the supply and socket alone will not turn it on. The PSU cables must be properly connected to the PC.
The 8-pin CPU connector can be separated into a 4+4 connector for motherboards requiring a 4-pin power connection. The 20+4-pin main connector can be separated into a 20-pin plug for motherboards requiring a 20-pin connection. Check the motherboard’s required connector before connecting either split plug.
Before You Decide
Confirm the required PSU format and available dimensions, the PC’s connector types and quantities, and whether a 500W maximum rating and the listed output ratings meet the system’s requirements.












