Quick Summary
The FATECIM 2 x Motorcycle LED Tail Light Brake Turn Signal Lights are aftermarket bullet-style lights for motorcycles. The key details given for this set include a 10 mm mounting screw thread, DC 12V operating voltage, and four configured wires for ground, brake lights, driving lights and turn signal lights.
This is a motorcycle lighting set with LED bulbs and a smoke lens finish. If you are comparing offers, check the mounting hole size, 12V system match and wiring layout before choosing.
Key Details
| Detail | Verified information and buyer relevance |
|---|---|
| Brand | FATECIM. Useful for matching the exact product family. |
| Product type | Motorcycle LED tail light brake turn signal lights. This indicates a lighting set for rear and signal use. |
| Quantity | 2 pieces. Check that this matches the number of lights you need. |
| Mounting screw thread | 10 mm. Confirm the fitting size on the motorcycle before ordering. |
| Operating voltage | DC 12V. This should suit a 12V motorcycle system. |
| Wire configuration | 4 wires: black for ground, red for brake lights, blue for driving lights, yellow for turn signal lights. |
| Finish | Matte black with smoke lens. This affects the visible style of the lights. |
| Light source | LED diode bulbs. Compare the light type with your preferred setup. |
What to Compare Before Buying
- Mounting size: The stated 10 mm screw thread is the main fit check. Measure the available mounting hole on the bike.
- Electrical system: The lights are for DC 12V motorcycles, so the system voltage needs to match.
- Wiring needs: The four wire colours are assigned to specific functions. Compare them with the wiring plan on your bike.
- Pack quantity: This set includes 2 lights, which matters if you need a matched pair or only one replacement.
Compatibility, Size and Fit
The lights are described as universal for 12V motorcycles with 10 mm mounting holes. They are also named for use with Harley, Honda, Suzuki, Kawasaki and Yamaha style cruisers and bobber bikes. Treat that as a fit check rather than a guaranteed match, and confirm the mounting size and wiring on the exact motorcycle.
What Else You May Need
If the indicators flash too quickly or do not operate correctly, the product text mentions a flasher relay or resistors. Check whether your motorcycle setup needs either of those parts before fitting the lights.
Before You Decide
Confirm the 10 mm mounting size, DC 12V system and four-wire layout before choosing this set. Check whether you need two lights, and make sure any relay or resistor requirement is covered for your motorcycle.
