Quick Summary
The GlowUp Heat Lamp Fixture is a reptile lamp holder with a thermostat timer and sensor probe. It uses an E27 socket, is rated up to 300W and includes dimmable temperature control for a terrarium setup.
The unit includes Always-On mode and cycle timer modes, with settings saved after a power loss. The stated temperature range is 4°C to 55°C / 40°F to 131°F, and the probe length is 1.88 m with a suction cup.
Key Details
| Detail | Verified information and buyer relevance |
|---|---|
| Product type | Reptile heat lamp fixture with thermostat timer and sensor probe. |
| Socket | E27 socket for compatible lamps. |
| Power rating | Up to 300W, so the lamp choice must stay within that limit. |
| Temperature range | 4°C to 55°C / 40°F to 131°F for the set control range. |
| Probe length | 1.88 m probe with suction cup. |
| Lamp size | 5.5 inch reflector. |
| Included bulb | No bulb included. |
What to Compare Before Buying
- Socket type: This fixture uses an E27 socket, so the lamp you plan to use needs the same fitting.
- Power rating: The fixture is rated to 300W. Compare that with the lamp you want to fit.
- Temperature range: The stated control range is 4°C to 55°C / 40°F to 131°F. Check that this suits your setup needs.
- Probe placement: The probe is 1.88 m long, so consider where it will sit in the terrarium.
- Lamp type: It is stated as not compatible with compact fluorescent bulbs or metal halide basking lamps.
What Else You May Need
A compatible E27 heat lamp or heat emitter is needed, since the fixture is supplied without a bulb. Check the chosen lamp stays within the 300W rating and suits your terrarium setup.
Before You Decide
Confirm the E27 fitting, the 300W limit and the 1.88 m probe length before choosing an offer. If you need a complete lighting setup, remember that the bulb is not included. Check that the lamp type you plan to use matches the stated compatibility limits.
