Quick Summary
The HAWCUT 125 mm 40T TCT circular saw blade for wood is a 2 pack of toothed blades for wood-cutting tasks. The stated 40T tooth count is aimed at finer crosscuts and sheet-material work, while the blades are marked for a 125 mm diameter and a maximum speed of 12,000 RPM.
Each blade has a 22.23 mm centre bore and includes a 20 mm reducing ring. It is intended for solid timber, plywood, MDF and chipboard, so the main buying check is whether your saw accepts that blade size, bore and speed rating.
Key Details
| Detail | Verified information and buyer relevance |
|---|---|
| Product type | Circular saw blade for wood cutting. |
| Pack quantity | 2 blades, so check the offer matches the quantity you need. |
| Diameter | 125 mm, which must suit the tool’s blade specification. |
| Tooth count | 40T, aimed at finer crosscuts and sheet-material work. |
| Centre bore | 22.23 mm, with a 20 mm reducing ring included. |
| Maximum speed | 12,000 RPM, so the saw must stay within that limit. |
| Intended materials | Solid timber, plywood, MDF and chipboard. |
What to Compare Before Buying
- Blade size: Compare the 125 mm diameter with the size your saw accepts.
- Bore and ring: Check the 22.23 mm bore and included 20 mm reducing ring against your machine’s arbor fit.
- Tooth count: The 40T blade suits finer crosscuts and sheet-material work, so compare that with the cut finish you want.
- Speed rating: Make sure your tool is rated to run at or below 12,000 RPM with a blade of this type.
- Pack quantity: Confirm that a 2 pack is the right quantity for your project or replacement need.
Compatibility, Size and Fit
This blade is sized for compatible power tools that expressly accept a 125 mm toothed wood-cutting blade with a 22.23 mm bore. The included 20 mm reducing ring adds another fit check, so compare the arbor and flange setup of your saw before fitting.
The blade should also match the tool’s rotation direction and the manufacturer’s instructions. If your saw requires a different diameter, bore or speed rating, a different blade version is needed.
Safe Use and Important Precautions
The blade has sharp cutting teeth, so handle it carefully during fitting and use. Fit it only when the power tool is fully powered off. Always wear protective gloves and goggles during installation and operation, use the correct safety guard and never exceed the marked maximum speed.
Keep the blade out of reach of children and pets when not in use.
Before You Decide
Confirm the 125 mm diameter, 22.23 mm bore and included 20 mm reducing ring suit your saw. Check that 40T is the tooth count you want for the type of cut you plan to make, and make sure your tool stays within the 12,000 RPM limit. If the arbor, rotation direction or blade size does not match, choose a different blade version.










