Quick Summary
The HDBUBALUS 4-piece motorcycle LED turn signal light set is a 12 V indicator kit with front and rear lights. It includes 2 lights with 41 mm clamps for the front and 2 lights without clamps for the rear.
Key checked details include the 39-41 mm clamp inner diameter, 20 LEDs per light and 2-wire construction. The 2-wire layout means the buyer should confirm how the lights will be connected on the intended motorcycle.
Key Details
| Detail | Verified information and buyer relevance |
|---|---|
| Brand | HDBUBALUS – the named product brand. |
| Product type | Motorcycle LED turn signals light set – a lighting kit for indicator use. |
| Quantity | 4 pieces total – 2 front lights and 2 rear lights. |
| Voltage | 12 V – check that this matches the motorcycle electrical system. |
| Clamp inner diameter | 39-41 mm – confirm the fork size before choosing this set. |
| LEDs per light | 20 LEDs per light – a useful check for the light build specified for each unit. |
| Wire length | Approx. 57.5 cm – check routing distance against the planned mounting position. |
| Included configuration | 2 x LED turn signal lights with 41 mm clamp for the front and 2 x LED turn signal lights without clamp for the rear. |
What to Compare Before Buying
- Clamp size: The stated 39-41 mm inner diameter is the main fit check for the front mounting point.
- Electrical system: The lights are listed as 12 V, so the motorcycle system needs to match that figure.
- Front and rear setup: This set separates front lights with clamps from rear lights without clamps, so confirm the intended mounting positions before choosing it.
- Wiring: Each light has 2 wires, so compare that layout with the wiring arrangement on the bike.
- Pack contents: Check that a 4-piece set is the quantity you need for the intended installation.
What Is Included
- 2 x LED turn signal lights with 41 mm clamp for the front
- 2 x LED turn signal lights without clamp for the rear
Before You Decide
Confirm the 39-41 mm clamp size, the 12 V electrical match and the 4-piece front-and-rear configuration before choosing this set. Check that the 2-wire layout suits the motorcycle wiring plan and that the included mounting style matches the positions you want to fit.
Follow the motorcycle manufacturer’s instructions for installation and wiring.
Fitment Idea for a Simple Custom Build
This set can suit a build where the front indicators need fork clamps and the rear indicators are mounted without clamps. That makes it useful for checking each end of the motorcycle separately before planning the wiring and mounting layout.
