Quick Summary
The HDBUBALUS front and rear LED bullet turn signal light set is a 4-piece indicator and blinker kit with an all-black finish. It includes 41 mm fork clamp lights for the front and rear lights without clamps.
The set is stated as 12 V and each light has 20 LEDs. It uses 2 wires per light, with a stated wire length of about 57.5 cm. Buyers should check the clamp size and the exact fit needed for their vehicle before choosing an offer.
Key Details
| Detail | Verified information and buyer relevance |
|---|---|
| Brand | HDBUBALUS. Useful for identifying the exact product family. |
| Product type | Front and rear LED bullet turn signal lights. This is an indicator and blinker set. |
| Quantity | 4 pieces in total. The included lights are split between front and rear use. |
| Finish | All black. This matters if you want the look to match other parts on the vehicle. |
| Voltage | 12 V. Check that this matches the vehicle electrical system. |
| LEDs per light | 20 LEDs per light. This is a core specification of the set. |
| Clamp inner diameter | 41 mm for the clamp-fit lights. Confirm the fork size before ordering. |
| Wiring | 2 wires per light, with a stated wire length of about 57.5 cm. |
| Included configuration | 2 LED turn signal lights with 41 mm clamp for the front, and 2 LED turn signal lights without clamp for the rear. |
What to Compare Before Buying
- Clamp size: The front lights use a 41 mm inner diameter clamp, so the fork area needs to match that size.
- Electrical system: The lights are stated as 12 V, so compare that with the vehicle system.
- Wiring layout: Each light has 2 wires, so check that the wiring setup suits the installation you plan.
- Set configuration: The front and rear lights are not the same style, so confirm the split between clamped and unclamped lights before buying.
Compatibility, Size and Fit
This set is listed for Harley Sportster, Dyna and Bobber applications. The front lights use a 41 mm fork clamp, so the most important fit check is whether the clamp size matches the fork area on the exact vehicle.
Because the rear lights are supplied without clamps, the rear mounting arrangement also needs to suit the chosen fitting point. Check the mounting position, wire routing and available space before deciding on the set.
What Is Included
- 2 x LED turn signal lights with 41 mm clamp for the front
- 2 x LED turn signal lights without clamp for the rear
Before You Decide
Confirm the 41 mm clamp size, the 12 V electrical system and the split between front clamped lights and rear lights without clamps. Check the mounting position on the exact vehicle before choosing a set.
Planning the Mounting Layout
Before fitting, it helps to map out where each light will sit and how the wires will run. The stated 57.5 cm wire length gives a basic guide for routing, but the exact path still depends on the vehicle layout and the mounting points you use.
