Quick Summary
This PCP air compressor is rated up to 4500 PSI (30 MPa) and has automatic shut-off at a preset pressure. The product is listed with 12V DC and 220V AC power; check the power arrangement for the exact unit before choosing it.
Key Details
| Detail | Product information and buyer relevance |
|---|---|
| Pressure rating | Up to 4500 PSI (30 MPa), for comparison with the pressure required by the tank being filled. |
| Motor | 300W brushless motor. |
| Power | 12V DC and 220V AC are listed. Confirm which supply options the exact unit supports. |
| Stated filling times | About 25 minutes for a 0.5L tank from 0 to 300 bar; 10 minutes for 200 to 300 bar. |
| Connection | 8mm female-thread quick connector. Check that it matches the intended connection. |
| Filter | The hose has a reusable, replaceable water filter, described as helping provide clean, dry compressed air. O-rings and filter elements are included. |
| Controls and cooling | A temperature display, a 12500 RPM fan that runs when switched on, and automatic shut-off at the preset pressure are specified. |
What to Compare Before Buying
- Required pressure: Check the tank’s required pressure against the compressor’s stated maximum of 4500 PSI (30 MPa).
- Power supply: Confirm whether the exact unit supports the supply you intend to use. The product is listed for 12V DC and 220V AC, while its operating details describe 12V DC car-battery power.
- Filling time: Use the stated tank size, pressure range and approximate times as a comparison point, rather than assuming the same time for other tanks.
Compatibility, Size and Fit
The 8mm female-thread quick connector is a specific connection detail, not evidence that it fits every PCP tank or hose. Check the mating connection on the equipment you plan to use.
Safe Use and Important Precautions
Keep the temperature below 75°C. If it exceeds this level, switch the compressor off and allow it to cool before continuing. Follow the instructions for the exact unit when operating it.
Before You Decide
Confirm the required pressure, connector fit and power supply for your intended setup. Also check that the stated filling figures are relevant to your tank’s capacity and pressure range.










