Quick Summary
The KETOTEK KT6000 is a plug-in digital thermostat and humidistat controller with a sensor probe, timer and day/night control. It is intended for temperature and humidity control through dual relay output, with separate use or combined use of the two sockets.
The controller includes a large LCD display with backlight, buzzer alarm and compressor delay start protection. It also supports 220V±15% power supply, a temperature control range of 0~50℃, a humidity control range of 1%RH~99%RH and a time period of 0~24h.
Key Details
| Detail | Verified information and buyer relevance |
|---|---|
| Brand | KETOTEK. Helps identify the exact product family. |
| Model | KT6000. Useful for matching the correct controller version. |
| Product type | Digital thermostat humidistat plug with sensor probe. This is a plug-in controller for temperature and humidity management. |
| Power supply | 220V±15%. Check this matches the intended mains supply before choosing an offer. |
| Temperature control range | 0~50℃. Compare this range with the conditions you need to regulate. |
| Humidity control range | 1%RH~99%RH. Useful when checking whether the controller covers your target humidity band. |
| Time period | 0~24h. Supports scheduled day and night control within a full day cycle. |
| Sensor probe | 1.5 m temperature and humidity probe. Check the probe reach against your setup. |
| Display | Large LCD display with backlight. The screen shows working modes, indicators, real-time temperature and humidity, plus settings values. |
What to Compare Before Buying
- Power supply: This model uses 220V±15%, so confirm the mains supply for the intended location.
- Temperature range: The stated 0~50℃ range should suit the temperatures you want to control.
- Humidity range: The 1%RH~99%RH range is the key figure to compare for humidity control needs.
- Probe reach: The 1.5 m probe length matters if the controller and sensing point will be separated.
- Scheduling: The 0~24h timer and day/night settings are important if you need automatic changes across the day.
Setup and Correct Use
The controller uses dual relay output, with one socket for day and night temperature control and the other for day and night humidity control. Both sockets can be used together or separately.
It supports heating or cooling mode for temperature control, and humidifying or dehumidifying mode for humidity control. Settings are retained after power off, and the backlight can be set to stay on, switch off after 10 minutes, or remain off.
Before You Decide
Confirm the KT6000 model, the 220V±15% power supply requirement and the 1.5 m probe length before choosing an offer. Check whether you need temperature control, humidity control or both, and compare the stated ranges with your intended setup. Follow the manufacturer instructions for installation and use.
