Quick Summary
The LUFEIS Reptile Heating Bulb is a 2 pack of 100 W infrared heat lamps with an E27 base. It is intended to provide heat for reptiles and other listed animals, including amphibians, chicks, birds and puppies.
The bulbs are described as having a frosted coating and red glass, with 220-240 V use and a stated distance of more than 30 cm from reptiles.
Key Details
| Detail | Verified information and buyer relevance |
|---|---|
| Brand | LUFEIS |
| Product type | Reptile heating bulb / infrared heat lamp |
| Pack quantity | 2 pack, so check whether you need one bulb or a paired replacement set. |
| Wattage | 100 W per bulb, which is the main power figure to compare with your fixture and setup. |
| Base | E27 base, so the lamp holder must match this fitting. |
| Voltage | 220-240 V, so the supply must suit this range. |
| Light and finish | Infrared bulb with frosted coating and red glass. |
| Stated use | For reptiles, amphibians, chicks, birds and puppies. |
What to Compare Before Buying
- Socket type: This bulb uses an E27 base, so compare it with the lamp holder you already have.
- Power rating: The stated rating is 100 W per bulb, so check that the fitting and setup are suitable for that level.
- Supply voltage: The bulb is stated for 220-240 V use, so confirm that your power supply matches.
- Pack quantity: This is a 2 pack, which matters if you are replacing one bulb or want a spare.
- Placement distance: The guidance says to keep more than 30 cm from reptiles, so allow for that in the enclosure layout.
What Else You May Need
You will need a compatible E27 lamp socket and a power supply that matches the stated 220-240 V rating. If the bulb is being used in an enclosure, make sure the setup allows the stated distance from the animal and follows the manufacturer’s instructions.
Before You Decide
Confirm the E27 fitting, the 220-240 V supply and the 100 W rating before choosing an offer. The 2 pack format also matters if you only need a single replacement bulb. Keep the stated distance from reptiles in mind when checking the enclosure layout.
