Quick Summary
The NUOGE PCP air compressor is specified for a rated pressure of 4500 PSI/30 MPa and has 12V automotive DC and 110V AC power options. It is described as oil- and water-free and comes with an oil-moisture filter and power converter.
The supplied description also gives a 250 W rating, an 8 mm quick-disconnect hose and inflation times for a 450 cc tank.
Key Details
| Detail | Product information and buyer relevance |
|---|---|
| Rated pressure | 4500 PSI/30 MPa, as stated in the product title. Check that this is appropriate for the item being filled. |
| Power and rating | 250 W; power options are listed as 12V automotive DC and 110V AC. The product is described as coming with a power converter. |
| Hose connection | Both ends have an 8 mm self-locking quick-disconnect fitting. The description says this fits the male nozzle of most PCP airguns and paintball cartridges. |
| Filter and pump description | Described as oil- and water-free, with an oil-moisture filter. |
| Stated inflation times | For a 450 cc tank, about 7 minutes from 100 bars to 200 bars, and about 18 minutes from 0 bars to 300 bars. |
| Duty cycle | Up to 25 minutes of continuous inflation, followed by 10 minutes of rest. |
Compatibility, Size and Fit
The 8 mm quick-disconnect fittings are described as fitting most PCP airguns and paintball cartridges, not necessarily every model. Check the connection on the exact item you intend to fill before use.
What to Compare Before Buying
- Power supply: Check the stated 12V automotive DC and 110V AC options against the power source available where you plan to use the compressor. Confirm the converter arrangement for your intended supply.
- Pressure and connection: Check the required pressure and fitting for the item being filled against the compressor’s stated rating and 8 mm connection.
- Inflation time and duty cycle: The times given apply to a 450 cc tank and the specified pressure ranges. Do not assume the same times for a different tank or starting pressure. Allow for the stated 10-minute rest after 25 minutes of continuous inflation.
Before You Decide
Confirm the power arrangement, pressure requirement and fitting for your exact equipment. Follow the operating instructions supplied with the compressor when connecting and using it.
Power and Pressure Checks
For UK mains use, check that the converter’s input rating suits the supply and that its output matches the compressor’s stated 110 V AC requirement. Do not connect a 110 V appliance directly to 230 V mains. Before filling, check the exact equipment’s permitted pressure and instructions; the compressor’s rated pressure is not a target to exceed.











