Quick Summary
The pam4nitox AC/DC battery charger is listed for rechargeable batteries used in RC hobbies, including airsoft. It supports several battery chemistries, with balance charging for LiPo packs. The stated maximums are 150W and 10A; check the battery type, cell count, required settings and connector before use.
Key Details
| Detail | Product information and buyer relevance |
|---|---|
| Power and current | Up to 150W and 10A are stated maximums. They do not establish the appropriate charging settings for a particular battery. |
| Supported chemistries | LiPo, Li-ion, LiFe, LiHv, NiMH, NiCd and Pb (lead-acid). Match the battery chemistry to the selected charger mode. |
| LiPo cell range | The listing specifies 2S to 6S LiPo packs. Check the pack’s cell count is within this range. |
| Functions | Balance charging and a 10W discharge mode are listed. The discharge mode is described for bringing a battery towards storage voltage, but no target voltage is specified. |
| Display | LCD interface. |
| Dimensions | 9.25 x 2.36 x 6.30 inches. |
| Listed protection features | Overcharge, short-circuit and temperature protection are stated. These features do not replace correct setup or the charger and battery instructions. |
Compatibility, Size and Fit
Support for a battery chemistry alone does not confirm that every battery of that type is suitable. Check the exact battery instructions and, for LiPo, confirm its cell count is within the stated 2S to 6S range. The listing does not identify connector types, so compare the battery connector with the supplied charge lead before relying on a fit.
What Is Included
The listing states that AC and DC cables, a multi-connector charge lead and detailed instructions are included. Check that the lead includes the connector needed for your battery. The AC and DC cables are listed, but their electrical specifications are not provided.
What to Compare Before Buying
- Battery chemistry: Check that the exact chemistry is supported and that the correct charger mode is available.
- Cell count and settings: For LiPo, confirm the pack is within the stated 2S to 6S range. Follow the battery and charger instructions for the appropriate charging settings rather than treating 10A as a recommended rate.
- Connections and power source: Check that the charge lead connector matches the battery, and that the supplied AC or DC cable suits the power source you intend to use.
Before You Decide
Confirm the battery chemistry, LiPo cell count where relevant, connector fit and required charging settings. Read the supplied charger and battery instructions before use; the listed protection features do not remove the need for correct operation.
