Quick Summary
The Xeoca PCP air compressor is described for PCP airguns, paintball equipment and scuba bottles. It has a built-in power converter, supports 12 V DC input and is specified for pressures up to 30 MPa (4500 PSI). Its oil-free, water-free design does not require an external water pump.
Key Details
| Detail | Product information and buyer relevance |
|---|---|
| Maximum pressure | 30 MPa (4500 PSI), the stated maximum inflation pressure. |
| Power | 12 V DC is specified. Confirm the compressor’s AC input rating before connecting it to mains power. |
| Rated power | 250 W. |
| Connector | 8 mm self-locking quick-disconnect fittings are specified at both ends of the hose. |
| Recommended cylinder volume | Up to 1 L (60 ci). |
| Stated inflation times | About 8 minutes for a 500 cc tank from 200 bar to 300 bar, or about 20 minutes from 0 bar to 300 bar. |
| Hose and temperature display | The hose is described as withstanding 60 MPa, and a display shows the compressor’s internal temperature. |
| Cooling and filtration | The compressor is described as oil-free and water-free, with an integrated oil-moisture filter and a fan rated up to 13,500 r/min. |
What to Compare Before Buying
- Power input: Check that the AC input rating on the exact unit matches your supply. The product’s AC voltage is not stated consistently, so do not rely on an assumed mains rating.
- Cylinder limits: Check that the intended cylinder is within the stated recommended volume of 1 L (60 ci) and maximum pressure of 30 MPa.
- Inflation timing: The listed times refer to a 500 cc tank and specific pressure ranges; they are not a stated time for every cylinder or starting pressure.
Compatibility, Size and Fit
The description says the 8 mm quick-disconnect fitting connects to the male nozzle of most PCP airguns and paintball cartridges. “Most” does not establish fit with every device, so check the exact connector on the equipment and cylinder you intend to use. Confirm suitability for the specific scuba bottle or other cylinder before connecting it.
Safe Use and Important Precautions
The stated duty cycle is up to 25 minutes of continuous inflation followed by a 10-minute rest. Stop filling when the display reaches 80 degrees and restart only after the compressor has cooled. Do not overcharge the connected air device. When using a battery, the description specifies that its current should be lower than 55 A. Follow the compressor and cylinder instructions for connection and operation.
Before You Decide
Confirm the exact AC input rating if you need mains power, check the connector against your equipment, and ensure the cylinder is within the stated pressure and volume limits. Allow for the stated duty cycle and temperature stop point during use.
Breathing-Air Suitability
Oil-free and water-free wording does not establish that the compressor produces air suitable for breathing. Before filling a scuba cylinder intended for breathing, verify that this exact compressor is rated to supply breathing-quality air and meets the cylinder’s requirements. If that cannot be confirmed, do not use it to fill a breathing-air cylinder.











