Quick Summary
The sourcing map 4 piece metal clip pushrod connector linkage is a threaded rod set for model control linkage work. It has a total length of 246 mm and an M2 thread, with 4 pieces in the pack. The product is made from 304 stainless steel.
This type of connector is intended for DIY model applications where a secure threaded linkage is needed, so the key checks are size, thread fit and whether the overall length suits the project.
Key Details
| Detail | Verified information and buyer relevance |
|---|---|
| Brand | sourcing map, useful for matching the exact item. |
| Product type | Metal clip pushrod connector linkage for model control linkage use. |
| Quantity | 4 pieces, so check whether you need a single connector or a small pack. |
| Total length | 246 mm / 9.69 inch, which matters for the overall linkage length. |
| Thread | M2, so thread fit is a key compatibility check. |
| Thread length | 10 mm / 0.39 inch, which affects how much threaded engagement is available. |
| Body diameter | 1.7 mm / 0.07 inch, relevant where space is tight. |
| Material | 304 stainless steel. |
What to Compare Before Buying
- Thread size: This connector uses M2 threading. Compare that with the rod, arm or fitting you want to attach it to.
- Length: The total length is 246 mm / 9.69 inch. Check that this suits your model layout.
- Pack quantity: The set contains 4 pieces, so make sure that matches the number of linkages you are building.
- Physical size: The 1.7 mm body diameter and 10 mm thread length may matter where clearance is limited.
What Else You May Need
You will need a project that accepts M2 threaded linkage parts. If the rod, servo arm or control point uses a different thread size, this connector will not be the right match.
Before You Decide
Confirm the M2 thread size, 246 mm overall length and 4 piece pack quantity before choosing an offer. For model builds and similar projects, the exact thread fit is the most important check.










