Quick Summary
The Spares2go Universal Exterior Wall Tumble Dryer Vent Cover Kit is a brown tumble dryer venting kit for a 4″ / 102mm duct setup. It is designed as an exterior wall vent cover kit with an extension hose, so the key buying checks are duct size, wall opening fit and the included parts.
The kit includes an external cowl with closure flap, a single brick wall pipe duct, two threaded hose adaptors, a fascia plate, 4 metres of vent hose, 8 Philips screws and 8 plugs.
Key Details
| Detail | Verified information and buyer relevance |
|---|---|
| Brand | Spares2go. This identifies the product range used for the kit. |
| Product type | Exterior wall tumble dryer vent cover kit with extension hose. |
| Colour | Brown. Check it suits the intended installation area. |
| Vent size | 4″ / 102mm. The vent connection size is the main compatibility check. |
| Fits models | All tumble dryers with a 4″ / 100mm duct spigot. A reducer is required on units with a 125mm spigot. |
| External cowl size | 155mm x 155mm. |
| Single brick wall pipe duct | 363mm x 111mm x 52mm, or cut to size. |
| Hose length | 4 metres. This affects how far the dryer can sit from the wall outlet. |
What to Compare Before Buying
- Duct size: The kit is for a 4″ / 102mm setup, and the fit with your dryer spigot matters most.
- Wall opening and spacing: The wall duct and hose length should suit the route from the dryer to the exterior vent.
- Included parts: Check that the cowl, hose, adaptors, fascia plate, screws and plugs match the installation you plan.
- Colour: Brown may be preferable where the vent is visible on an exterior wall.
What Is Included
- External cowl with closure flap
- Single brick wall pipe duct
- 2 threaded hose adaptors
- Fascia plate
- 4 metre vent hose
- 8 Philips screws
- 8 plugs
Before You Decide
Confirm the 4″ / 102mm vent size, the dryer spigot size and the wall route before choosing an offer. If your dryer uses a 125mm spigot, a reducer is needed. Check that the included parts suit the installation you have planned.
