Quick Summary
This is a tap connector adapter for round mixer taps up to 35 mm in diameter. It creates a quick connect hose connection for standard garden hose fittings and is not suitable for square taps, pull-out spray taps, sensor taps, oversized taps or non-removable aerators.
Before choosing an offer, measure the tap carefully and make sure the spout is a smooth round shape. The fitting is designed to clamp on with a sealing washer and locking lever.
Key Details
| Detail | Verified information and buyer relevance |
|---|---|
| Product type | Tap connector adapter for hose connection use. |
| Tap shape | Round taps only, not square taps. |
| Maximum tap diameter | 35 mm maximum, so the tap must fit within this size limit. |
| Connection style | Quick connect hose adapter for standard garden hose quick connect fittings. |
| Fitment note | Uses a clamp-on fitting with a sealing washer and locking lever. |
What to Compare Before Buying
- Tap shape: This adapter is for smooth round mixer taps, so check that the tap is not square, spray-style or sensor-operated.
- Tap diameter: The stated maximum is 35 mm, so measure the spout before ordering.
- Spout design: Non-removable aerators are not suitable with this fitting.
- Hose connection: Make sure your hose uses standard quick connect fittings if that is how you plan to attach it.
Compatibility, Size and Fit
The main buying check is the tap itself. This adapter fits smooth round taps only, with a maximum diameter of 35 mm. It is not compatible with square taps, pull-out spray taps, sensor taps, oversized taps or non-removable aerators. Measure the tap and compare the spout shape before choosing an offer.
Before You Decide
Confirm that your tap is smooth and round, with a diameter of 35 mm or less. Check that the spout does not use a non-removable aerator, and make sure your hose uses the quick connect format this fitting is made for.
How It Works
The connector is fitted by unscrewing the bottom part, pushing it over the tap, positioning the white seal over the spout, pulling the orange lever down and then tightening from the bottom until secure. If water sprays from the side, turn the water off and reposition the white washer.
What Is Included
The product is a tap connector adapter fitting. It connects to standard garden hose quick connect fittings.
Setup and Correct Use
- Unscrew the bottom part of the connector.
- Push it over the tap and position the white seal over the spout.
- Pull the orange lever down.
- Screw up from the bottom until the item is tight.
- Turn on the water and check for spray at the side.
- If needed, turn the water off and reposition the white washer.
Important Limitations
This fitting is not universal. It is limited to round taps and a maximum diameter of 35 mm. It does not suit square taps, spray taps, sensor taps, oversized taps or taps with non-removable aerators.
Common Buyer Questions
Will this fit any kitchen tap?
No. It is for smooth round mixer taps only, up to 35 mm in diameter.
Does it work with garden hose quick connect fittings?
Yes. It is made to connect directly to standard garden hose quick connect fittings.
Before You Decide
Measure the tap, check that it is a smooth round mixer tap and confirm the diameter is within 35 mm. If the tap is square, spray-style, sensor-operated or fitted with a non-removable aerator, this is not the right connector.
