Quick Summary
This TUXING high-pressure air compressor is presented for scuba tank and PCP rifle filling. It runs on 220 V, 50 Hz single-phase power and has a stated charging rate of 100 L/min.
Key Details
| Detail | Product information and buyer relevance |
|---|---|
| Working pressure | 300 bar, 30 MPa or 4500 PSI. Check this against the requirements of the specific item being filled. |
| Power | 220 V, 50 Hz, single phase; motor power is stated as 2.2 kW / 3 HP. |
| Charging rate | 100 L/min, also stated as 3.5 CFM. |
| Compression and separation | Three-stage compression with water-oil separators. |
| Filling components | High-pressure filling hoses, swivel hose connections and a final pressure gauge with a rubber protective jacket. |
| Stated tank fill times | 20 minutes for 6.8 L, 25 minutes for 9 L and 30 minutes for 12 L. Starting pressure and other filling conditions are not specified. |
| Base frame | Stainless steel. |
What to Compare Before Buying
- Power supply: Confirm that 220 V, 50 Hz single-phase power is suitable for the intended setup.
- Pressure and filling requirements: Check the specific tank or rifle equipment’s permitted pressure and filling requirements against the compressor’s stated 300 bar maximum.
- Fill-time expectations: The listed times do not state starting pressure or filling conditions, so do not assume they apply to every fill.
Compatibility, Size and Fit
The product is presented for scuba tank and PCP rifle filling, but specific connector types and compatible tank or rifle models are not given. Confirm that the supplied hose and connections match the exact equipment to be filled before use.
Before You Decide
Check the power supply, pressure requirements and connection fit for your equipment. Follow the manufacturer’s operating instructions and confirm that the compressor is suitable for the intended air use; water-oil separators alone do not establish breathing-air quality.








