Quick Summary
The WattCycle 12V 100Ah LiFePO4 battery is a BCI Group 24 deep-cycle battery with a built-in 100A BMS. Its stated dimensions are 26 × 17 × 21 cm and its weight is 10.5 kg. Check the physical fit and electrical compatibility with your system before choosing it.
Key Details
| Detail | Product information and buyer relevance |
|---|---|
| Battery type and capacity | LiFePO4, 12V and 100Ah. Confirm these match your system requirements. |
| Group size | BCI Group 24. Check the battery compartment and connections rather than relying on group size alone. |
| Dimensions and weight | 26 × 17 × 21 cm and 10.5 kg. Compare the dimensions with the available space and consider the weight when planning installation. |
| Built-in BMS | Rated at 100A. The stated protection functions include overcharge, over-discharge, over-current, short circuit and temperature extremes; the description also says it can shut down and recover automatically. |
| Temperature range | The stated operating range is -20°C to 70°C. Low-temperature protection is specified for charging in freezing conditions. |
| Series and parallel use | The description states that up to four units can be connected in series for 48V or in parallel for 400Ah. Confirm the intended configuration suits the system. |
What to Compare Before Buying
- Space and fit: Compare the 26 × 17 × 21 cm dimensions with the available compartment, including room for the connections.
- Electrical requirements: Check that your system is designed for a 12V, 100Ah LiFePO4 battery and that its charging equipment is compatible.
- Connection plan: If using multiple batteries, confirm that the proposed series or parallel arrangement matches the stated limits and your system design.
- Temperature conditions: Consider the stated -20°C to 70°C operating range and the low-temperature charging protection when checking your intended conditions.
Compatibility, Size and Fit
BCI Group 24 identifies the battery group, but does not by itself confirm that it will fit every compartment or connect to every system. Check the available space, terminal arrangement and your equipment’s requirements before selecting this battery.
Important Limitations
The stated series and parallel configurations do not establish compatibility with every charger, load or battery system. Follow the equipment and battery instructions when planning installation and use. The available description does not provide a charging procedure.
Before You Decide
Confirm the compartment dimensions, 12V and 100Ah system requirements, charging-equipment compatibility and any intended multi-battery configuration. Check the supplied instructions for installation and charging guidance.











