Quick Summary
The YONGHENG PCP air compressor is described for filling PCP air rifles and pistols, and paintball tanks. It has a stated maximum working pressure of 300 bar/4500 psi/30 MPa, with automatic shut-off when the preset pressure is reached. The stated power options are 110V AC or a 12V vehicle battery.
Key Details
| Detail | Product information and buyer relevance |
|---|---|
| Maximum working pressure | 300 bar/4500 psi/30 MPa. Check that the requirements of the item being filled are compatible. |
| Pressure control | Adjustable pressure gauge and automatic shut-off at the preset pressure. |
| Other gauge | An adjustable temperature gauge is stated. |
| Power | 110V AC or 12V vehicle battery operation. |
| Oil and cooling | Described as oil- and water-free, with no external water pump needed for cooling. |
| Filling-time example | The description states 16 minutes to raise a 0.5 L diving bottle from 0 MPa to 30 MPa. |
| Separator | A water/oil separator is identified in the product name. |
What to Compare Before Buying
- Check whether the available power source is 110V AC or a 12V vehicle battery, as required for your intended setup.
- Compare the item’s required pressure with the compressor’s stated maximum of 300 bar/4500 psi/30 MPa.
- Check the connection required by your particular PCP rifle, pistol or paintball tank. The description does not give a connector specification.
- Treat the 16-minute figure as the stated example for a 0.5 L bottle going from 0 MPa to 30 MPa, not as a filling-time claim for other sizes or starting pressures.
Important Limitations
No operating or safety procedure is provided here. Check the requirements for the exact item being filled and follow the compressor and equipment manufacturers’ instructions.
Before You Decide
Confirm the required pressure, connection and power source for your equipment. Check that the stated fill-time example is relevant to your bottle, and consult the applicable instructions before use.
Before using the 110V AC option, check that the available supply is compatible with the compressor’s stated input. Do not assume it can be connected directly to a UK mains supply; confirm the requirements for the exact unit.











