Quick Summary
This is a 1.3ft 2X 10dBi WiFi Bluetooth antenna with an RP-SMA male connector. It is an omni directional antenna that sends and receives signal in 360 degrees, and it is described as suitable for WiFi, Bluetooth and ZigBee.
The screw-on, swivel mount connection is intended for devices with an RP-SMA female connector, including routers, wireless access points, USB WiFi adapters, PCI WiFi adapters and booster-style equipment.
Who It Is Best For
This antenna suits buyers looking to replace or add an RP-SMA antenna to compatible wireless network devices. It is also listed for use with WiFi IP security cameras, wireless video surveillance DVR recorders and some Bluetooth audio equipment that uses the stated connector type.
Key Details
| Detail | Verified information and buyer relevance |
|---|---|
| Length | 1.3ft, which is useful when checking the physical size before fitting. |
| Gain | 2X 10dBi, a stated specification that helps identify the exact variation. |
| Connector | RP-SMA male connector, so the matching device side needs an RP-SMA female connector. |
| Antenna pattern | Omni directional, with 360 degree transmission and reception as stated. |
| Listed uses | WiFi, Bluetooth and ZigBee, plus routers, access points, USB and PCI WiFi adapters, WiFi IP security cameras and some audio equipment. |
Why Buyers Choose It
- The omni directional design is stated to send and receive signal around 360 degrees, which matters if the antenna position changes often.
- The screw-on RP-SMA connection makes it important to match the connector type before ordering.
- The listed device range covers routers, adapters, cameras and some Bluetooth audio equipment, so it may suit buyers replacing a compatible antenna on several device types.
How It Works
- Check that your device has an RP-SMA female connector.
- Twist off the factory antenna if one is fitted.
- Twist on the replacement antenna using the screw-on connection.
- Position the swivel mount as needed for your setup.
Real World Use
The antenna is described for wireless network devices, WiFi access points, USB and PCI adapters, security cameras, DVR recorders and Bluetooth audio equipment. Its omni directional pattern means it is intended to work across all directions rather than in one narrow direction.
What To Know Before You Buy
Check the connector type carefully before ordering. This antenna uses an RP-SMA male connector and is intended for devices with an RP-SMA female connector. Review the selected 1.3ft size and the 2X 10dBi specification to make sure they match your intended setup. The listed compatibility is broad, but the exact fit still depends on your equipment.
Common Buyer Questions
What connector does this antenna use?
It uses an RP-SMA male connector.
What devices is it listed for?
It is listed for routers, WiFi USB adapters, PCI WiFi adapters, access points, booster equipment, WiFi IP security cameras, DVR recorders and some Bluetooth audio equipment.
How is it fitted?
It screws onto a matching RP-SMA female connector and is described as a simple twist-on replacement.
Final Buying View
If you need a 1.3ft omni directional antenna with the stated RP-SMA male connector, this listing gives a clear set of compatibility checks. Confirm the connector type and the size before ordering, then match the antenna to your intended device.
