Quick Summary
The Sovol SH01 is a 3D printer filament dryer and dry box for keeping filament dry during 3D printing. It is described as compatible with 1.75mm and 2.85mm PLA, PETG, TPU and ABS material.
The unit includes real-time temperature and humidity monitoring, with drying settings of 40°C, 45°C or 50°C and a timer from 6 to 12 hours. It also includes a power-off drying mode for filament storage.
Who It Is Best For
This dryer box is for buyers who want to store filament in a controlled box and dry it before or during use. It will suit anyone checking spool size, filament diameter or drying settings before ordering.
Key Details
| Detail | Verified information and buyer relevance |
|---|---|
| Product name | Sovol SH01 filament dryer, dehydrator spool holder and dry box. |
| Compatible filament | Compatible with 1.75mm and 2.85mm PLA, PETG, TPU and ABS material. |
| Temperature settings | Selectable settings of 40°C, 45°C and 50°C for drying control. |
| Timer range | Drying time can be set from 6 hours to 12 hours. |
| Monitoring | Displays humidity and temperature in real time inside the dry box. |
| Storage capacity | Can store 2 filament rolls with a width of less than 70 mm or 1 filament roll with a width of less than 150 mm. |
| Dry storage feature | Silicone and PTFE seal support storage without power for longer periods. |
| Maintenance note | Four bags of desiccants can be placed inside, although they are not included. |
Why Buyers Choose It
- Real-time temperature and humidity display gives a visible check on conditions inside the box.
- Three drying temperatures let you choose between the stated settings.
- The stated roll capacity helps you check whether your spool size fits before ordering.
- The power-off drying mode supports filament storage when the unit is not running.
How It Works
- Place the filament into the filament outlet.
- Set the filament so it is placed counterclockwise.
- During heating, open the PTFE seals on the top of the box for moisture evaporation.
- Select the drying temperature and time from the stated settings.
- If the screen shows errors E0 and E1, open the drying box and check the cable sockets on the motherboard for damage or looseness.
Real World Use
The dry box is used with 3D printer filament rolls and is intended to help keep them dry while stored or during printing. Its stated roll-size limits mean the spool dimensions are a key check before purchase. The built-in monitoring also lets you see temperature and humidity inside the box while it is in use.
What To Know Before You Buy
Check your filament diameter, spool width and material type before ordering. The box is stated to suit 1.75mm and 2.85mm PLA, PETG, TPU and ABS material, but the roll width still needs to match the stated capacity. Open the top PTFE seals during heating and place the filament counterclockwise in the outlet for the stated feeding direction. If E0 or E1 appears, the cable sockets on the motherboard should be checked.
Common Buyer Questions
Which filament sizes does it support?
It is stated as compatible with 1.75mm and 2.85mm filament.
What drying settings are available?
The selectable temperatures are 40°C, 45°C and 50°C, with a timer from 6 to 12 hours.
How many spools can it hold?
It can store 2 filament rolls under 70 mm wide or 1 filament roll under 150 mm wide.
What should I do if E0 or E1 appears?
Open the box and check the cable sockets on the motherboard for damage or looseness.
Final Buying View
Choose the Sovol SH01 if you want a filament dryer box with stated temperature control, humidity and temperature monitoring, and storage for supported spool sizes. Confirm your filament diameter and roll width before ordering so the box matches your setup.
