Quick Summary
This 8A intelligent charger and tester is for 12V lead-acid, AGM, EFB, GEL and LiFePO4 batteries with a capacity below 150 Ah. It combines charging, battery testing and a repair function, with a UK plug, LCD screen and LED indicator.
Key Details
| Detail | Product information and buyer relevance |
|---|---|
| Battery voltage and capacity | For 12V batteries with capacity below 150 Ah. Check both against the battery being tested or charged. |
| Supported battery types | Lead-acid, AGM, EFB, GEL and LiFePO4. |
| Charging current | Automatically adjusted by the microprocessor from 0 to 8A. |
| Charging efficiency | Stated as 90%. |
| Repair function | The description gives a minimum battery voltage of 3V for this function. |
| Cables and plug | 140 cm test cables, 200 cm power cable and a UK plug. |
| Operating temperature | Stated operating range: -20°C to 50°C. |
| Casing | Described as acid-resistant ABS. |
Key Features Explained
The tester measures cold cranking current (CCA) and analyses battery status. It also provides starter and system load testing, with several testing standards available. The stated CCA range is inconsistent, so check the exact range for the version being considered before relying on a particular test result.
Test results can be saved with a QR code for maintenance records. During charging, the LCD and LED indicator show progress and status. The charger is described as stopping automatically when the battery is fully charged or when a phase’s time limit is reached.
What to Compare Before Buying
- CCA testing range: Confirm the range for the exact version, as the stated figures differ. Do not assume a particular minimum or maximum from the product details.
- Testing requirements: Check that the available battery tests and standards suit the checks you intend to perform.
- Cable reach: Compare the 140 cm test cables and 200 cm power cable with the intended setup.
- Operating conditions: Compare the stated -20°C to 50°C range with the conditions in which the charger would be used.
Compatibility, Size and Fit
Check that the battery is 12V, is one of the five listed types and has a capacity below 150 Ah. The 3V minimum is stated for the repair function; it should not be treated as a promise that every low-voltage battery can be recovered. Confirm the battery’s details and the charger’s stated CCA testing range before use.
Safe Use and Important Precautions
The description lists overload, short-circuit, reverse-polarity, overcurrent and overvoltage protection. These are stated features, not a substitute for following the manufacturer’s connection and operating instructions. The description also mentions automatic desulfurization but does not explain its operation.
Before You Decide
Confirm the battery’s voltage, type and capacity, then check the CCA testing range for the exact version. Also consider whether the cable lengths suit the intended setup and whether the stated operating temperature range is appropriate.










