Quick Summary
DEEPLEE PLA Plus 2.0 is a black 1kg 3D printer filament in 1.75mm size for use with most FDM 3D printers. It is presented as an upgraded PLA+ filament, with a focus on smooth feeding and consistent printing.
The product description also gives recommended printing settings of 200 to 230 °C for the nozzle, 35 to 65 °C for the bed, and 30 to 300 mm/s for print speed. Check your printer and preferred settings before ordering.
Who It Is Best For
This filament suits buyers who need a 1.75mm black PLA+ spool for FDM printing and want to check printer compatibility before use. It is also relevant if you are looking for a 1kg filament spool with stated print setting guidance.
Key Details
| Detail | Verified information and buyer relevance |
|---|---|
| Product | DEEPLEE PLA Plus 2.0 filament for 3D printing. |
| Colour | Black, which matters if you need a specific printed finish. |
| Weight | 1kg spool, giving you the stated amount of filament for your printing jobs. |
| Diameter | 1.75mm, so you should confirm your printer accepts this filament size. |
| Compatibility | Fits most FDM 3D printers, but you should still check your printer’s filament requirements. |
| Recommended nozzle temperature | 200 to 230 °C. |
| Recommended bed temperature | 35 to 65 °C. |
| Recommended print speed | 30 to 300 mm/s. |
| Stated print characteristics | Higher impact resistance, reduced brittleness and deformation, smooth printing flow and better layer adhesion are all stated in the product copy. |
Why Buyers Choose It
- The stated 1.75mm diameter helps buyers match the filament to a compatible FDM printer.
- The 1kg spool size gives a clear quantity reference for planning print jobs.
- The recommended temperature and speed guidance gives a practical starting point for setup.
- The black finish is useful when colour is part of the project requirement.
What To Know Before You Buy
Confirm that your 3D printer uses 1.75mm filament and is suitable for FDM printing before ordering. The listed print settings are a starting point, so you may need to adjust them for your printer and project.
The product copy also refers to better impact resistance, reduced brittleness and smooth printing flow, but these are presented as claims rather than detailed technical measurements.
Common Buyer Questions
Will this work with my printer?
It is stated to fit most FDM 3D printers, but you should confirm that your machine uses 1.75mm filament.
What size spool is it?
It is a 1kg spool.
What temperatures should I use?
The recommended nozzle temperature is 200 to 230 °C, with a bed temperature of 35 to 65 °C.
Is the filament black?
Yes, the listed colour is black.
Final Buying View
DEEPLEE PLA Plus 2.0 is a black 1kg, 1.75mm PLA+ filament for FDM 3D printers. Check printer compatibility and preferred print settings before choosing this spool.
