Quick Summary
The EAFC 2-in-1 12V 6A Smart Battery Tester and Charger combines battery checking and charging in one unit. It is described as a portable diagnostic tool with an LCD display for checking battery condition, and it supports 12V batteries including AGM, GEL, WET and LiFePO4.
It is aimed at battery health checks and automatic charging for compatible vehicle and storage batteries. The stated mains supply is Type G, 230 V / 50 Hz.
Key Details
| Detail | Verified information and buyer relevance |
|---|---|
| Product type | 2-in-1 smart battery tester and charger for checking and charging compatible 12V batteries. |
| Charging output | 12V 6A, which is the main figure to compare against the battery and charging needs. |
| Battery types named | AGM, GEL, WET and LiFePO4 are listed, so the battery type matters before choosing. |
| Display | LCD display with backlight for reading results more easily in low light. |
| Power lead | 2 m power cord, which affects reach from the mains point to the vehicle or battery. |
| Test functions named | Voltage, capacity, sulphation, SOH, SOC, CCA, rated power, resistance, cranking and charging test are listed. |
| Mains supply | Type G mains, 230 V / 50 Hz. |
What to Compare Before Buying
- Battery type: Check that your battery matches one of the named types, especially if you need support for AGM, GEL, WET or LiFePO4.
- Voltage and output: This unit is for 12V batteries and has a stated 6A charging output.
- Testing needs: Compare the named test functions with the checks you want to carry out, such as voltage, SOC or CCA.
- Cable reach: The 2 m power cord is worth checking against where the battery sits and where mains power is available.
- Mains supply: Confirm that a Type G, 230 V / 50 Hz supply matches your setup.
Compatibility, Size and Fit
This charger and tester is described for 12V batteries and lists compatibility with AGM, GEL, WET and LiFePO4 batteries. The battery health check also mentions batteries from 100-2000CCA. Before choosing an offer, check that your battery falls within the stated battery type and CCA range, and that the mains supply suits the intended location.
What Is Included
- 1 battery charger and tester in one
- Clips
- Battery clamps
- 2 m test leads
- User manual
What Else You May Need
You will need a suitable 230 V / 50 Hz Type G mains supply for use. If the battery is already installed in a vehicle, make sure the leads and cable length suit the working position.
Before You Decide
Confirm that your battery is 12V and matches one of the named battery types. Check the 6A charging output, the 2 m lead length and the included clips, clamps and test leads before choosing an offer. If battery condition checking matters, compare the listed test functions with the checks you want to make.
