Quick Summary
The GYM MASTER 10 mm resistance band pegs are made for the GM2 Power Cage Rack and are used to add accommodating resistance. The pegs slide through the cage, and the T-bar shape is intended to help keep bands in place during use.
The set is described as solid steel with a chrome finish, and the stated measurements are 10 mm diameter with a 20 cm peg length. Check the rack fit, the intended use and the floor-bolted requirement before choosing an offer.
Key Details
| Detail | Verified information and buyer relevance |
|---|---|
| Brand | GYM MASTER. |
| Product type | Resistance band pegs for a power cage rack. |
| Compatibility | Made for the GM2 Power Cage Rack. |
| Diameter | 10 mm, which should match the rack opening or peg fit required. |
| Peg length | 20 cm, a useful check for spacing and band setup. |
| Construction | Solid steel construction with a chrome finish. |
| Use note | Band pegs should only be used if the rack is bolted to the floor. |
| Commercial use | Not suitable for commercial use. |
What to Compare Before Buying
- Rack compatibility: These pegs are made for the GM2 Power Cage Rack. Confirm that your rack matches this model.
- Peg size: The stated 10 mm diameter and 20 cm length affect fit and band placement.
- Mounting requirement: Use is limited to racks that are bolted to the floor.
- Intended use: They are for adding accommodating resistance, so make sure that matches your training setup.
- Use environment: The stated non-commercial limitation matters if the rack will be used in a gym setting.
Compatibility, Size and Fit
These pegs are made for the GM2 Power Cage Rack. The 10 mm diameter and 20 cm length are the key size details to check before buying, especially if you need the pegs to sit correctly in your rack and allow band positioning.
The rack must also be bolted to the floor for use. That makes floor-fixed installation an important part of the buying decision, not just an afterthought.
Before You Decide
Confirm that your rack is the GM2 Power Cage Rack, that the 10 mm by 20 cm peg size suits your setup, and that the rack is bolted to the floor. Also check that the non-commercial use limitation fits how the rack will be used.
