Quick Summary
The GYM MASTER GM2 is a half power rack squat cage with storage system, spotters and a pull-up bar. It is described with 36 adjustment levels, upgraded Westside spacing and laser-cut numbering, and it has a stated 350 kg maximum load.
The rack is made from 60×60 2.0 mm steel and the storage upgrade is made from 50×50 14-gauge steel. It is also described as not suitable for commercial use.
Key Details
| Detail | Verified information and buyer relevance |
|---|---|
| Product type | Half power rack squat cage with storage system, spotters and pull-up bar. |
| Adjustment levels | 36 levels, with upgraded Westside spacing and laser-cut numbering for setting the rack height. |
| Load limit | 350 kg maximum load, which is a key check for anyone comparing training needs. |
| Main rack material | 60×60 2.0 mm steel. |
| Storage upgrade material | 50×50 14-gauge steel with 4 Olympic storage poles on each side. |
| Included items | Pull-up bar, 2 GM3 safety spotters and 2 laser-cut J-cups with UHMW. |
| Colour / finish | Gunmetal powder coated finish. |
| Fitment note | Suits 6 ft International or 7 ft bars. |
| Dimensions | Approx. 221 cm high max, 124 cm wide and 149 cm deep. |
| Installation note | Pre-drilled with 11 mm diameter holes. Floor fixings are not included. |
| Use note | Not suitable for commercial use. |
What to Compare Before Buying
- Space: The stated footprint is 124 cm wide by 149 cm deep, with an approximate maximum height of 221 cm. Check ceiling height and floor space before choosing.
- Bar fit: It suits 6 ft International or 7 ft bars, so compare that with the barbell you already own.
- Load limit: The stated maximum load is 350 kg. Compare that with the heaviest setup you expect to use.
- Storage setup: The bolt-on storage upgrade adds Olympic plate storage poles on both sides, so check whether that layout suits your gym space.
- Fixing requirements: The rack is pre-drilled with 11 mm holes, but floor fixings are not included, so confirm the fixing method for your floor type.
Compatibility, Size and Fit
The rack suits 6 ft International or 7 ft bars. That makes bar length an important check before buying, especially if you already have a barbell at home.
For the room itself, compare the approximate 221 cm maximum height, 124 cm width and 149 cm depth against the available training area. The storage add-on is also stated separately at 187 cm high and 52 cm deep, which matters if you are planning the layout of a compact home gym.
What Is Included
- Half power rack squat cage
- Storage system upgrade
- Pull-up bar
- 2 GM3 safety spotters
- 2 laser-cut J-cups with UHMW
What Else You May Need
- A compatible 6 ft International or 7 ft bar.
- Floor fixings suitable for your floor type, as these are not included.
Choosing the Correct Version
This version is the GM2 Half Rack with storage and spotters. Check the exact included configuration before choosing, especially if you want the rack with storage, spotters and the pull-up bar rather than a different setup.
Important Limitations
The rack is not suitable for commercial use. Floor fixings are not included, so installation depends on the fixing method chosen for the floor surface.
Before You Decide
Confirm the GM2 configuration, the 350 kg load limit and the available floor and ceiling space before choosing an offer. Also check that your barbell matches the stated 6 ft International or 7 ft fitment, and make sure you have suitable floor fixings for your surface.
