Quick Summary
The GYM MASTER GM2 is a power rack squat cage with an optional dual pulley cable system. It is built around a 60 mm x 60 mm steel frame, with 36 adjustment levels, full length safety spotters, J-Cups and a straight-grip pull-up bar.
The rack is set up for home weight lifting and gives you a cage for barbell work plus a cable system for movements such as lat pulldowns, tricep pushdowns and seated rows. It also states compatibility with 6 ft Int’l or 7 ft barbells and a range of GYM MASTER GM2 attachments.
Key Details
| Detail | Verified information and buyer relevance | |
|---|---|---|
| Product type | Power rack squat cage with dual cable pulley system for home weight lifting. | |
| Frame | 60 mm x 60 mm, 2 mm steel frame with gunmetal powder coating. | |
| Adjustment levels | 36 levels with laser cut numbering for easier position selection. | |
| Hole diameter | 16 mm holes, which affect attachment and setting compatibility. | |
| Safety equipment | Full length safety spotters and J-Cups are included. | |
| Pull-up bar | 32 mm straight-grip pull-up bar. | |
| Compatibility | Suitable for 6 ft Int’l or 7 ft barbells and compatible with a range of GYM MASTER GM2 attachments. | |
| Cable system | Integrated high and low pulley system with footrests for pulling movements. | |
| Dimensions | Approx. 224 cm high including top pulley wheel, 124 cm wide at the widest point and 174.5 cm deep. | |
| Maximum load | 350 kg maximum load and 180 kg maximum user weight. | |
| Use limit | Not suitable for commercial use. |
What to Compare Before Buying
- Space: The rack measures about 224 cm high, 124 cm wide and 174.5 cm deep. Check ceiling height and floor space before choosing it.
- Barbell compatibility: It is stated for 6 ft Int’l or 7 ft barbells, so confirm the bar you already own matches that format.
- Load limits: The stated maximum load is 350 kg and the maximum user weight is 180 kg. Compare those figures with your intended use.
- Attachment setup: The rack uses 16 mm holes and supports a range of GM2 attachments. Check any extras you want to add.
- Use environment: It is stated as not suitable for commercial use, so it is aimed at home training rather than a gym setting.
What Else You May Need
If you plan to use the rack for barbell training, you will need a compatible 6 ft Int’l or 7 ft barbell. If you want to use the cable system, check whether any additional GM2 attachments are required for the exercises you plan to do.
Using It in Practice
The rack combines a squat cage with high and low cable stations, so it suits buyers who want one frame for both barbell and cable work. The rear base bar placement also leaves extra room for bench positioning inside the cage, which is useful if you plan to bench within the rack.
The footrests on the pulley system support seated pulling movements, while the J-Cups and safety spotters give the rack a more complete training setup for home use.
Before You Decide
Confirm the rack height against your ceiling space, check the barbell size you already own, and make sure the 350 kg load limit and 180 kg user weight limit suit your training plans. If you want cable work, review the exact GM2 attachment setup before choosing an offer.
