Quick Summary
The Hardwin 216mm 80T TCT circular saw blade is a fine-cut blade for wood cutting. It has a 30mm bore, a 2.4mm kerf and an included 25.4mm reduction ring for saws that use a 1-inch arbor.
This blade is described for fine cross-cuts in hardwood, softwood, plywood, MDF, chipboard, laminate and multi-panel materials. The ATB tooth geometry, tungsten carbide tipped teeth and hardened steel plate are all stated as part of the blade construction and cutting design.
Key Details
| Detail | Verified information and buyer relevance |
|---|---|
| Diameter | 216 mm. Check it matches the saw size required for your machine. |
| Tooth count | 80T. A higher tooth count is generally chosen for finer cuts. |
| Bore | 30 mm bore, with a 25.4 mm reduction ring included for 1-inch arbor saws. |
| Kerf | 2.4 mm thin kerf. Compare this with the cut width you need for the job. |
| Tooth type | TCT with ATB tooth geometry. This is intended to support cleaner, more precise cuts. |
| Compatible saws | Compatible with 216 mm mitre saws and table saws from Dewalt, Makita, Evolution, Bosch, Ryobi and other brands using 30 mm or 25.4 mm arbor sizes. |
What to Compare Before Buying
- Saw size: The blade is 216 mm, so the saw must take that diameter.
- Arbor size: Check whether your saw uses 30 mm or 25.4 mm fitting, and use the reduction ring where needed.
- Cut finish: The 80-tooth fine-cut format is aimed at cleaner cross-cuts rather than faster rough cutting.
- Material type: It is listed for wood, plywood, MDF, chipboard, laminate and multi-panel materials.
- Kerf width: The 2.4 mm kerf affects the cut width and should suit the intended job.
Compatibility, Size and Fit
This blade is described as suitable for 216 mm mitre saws and table saws from Dewalt, Makita, Evolution, Bosch, Ryobi and other brands that use 30 mm or 25.4 mm arbor sizes. Confirm the saw diameter and arbor fitting before choosing an offer.
What Else You May Need
You will need a compatible saw that accepts a 216 mm blade and the relevant arbor size. If your machine uses a 1-inch arbor, the included 25.4 mm reduction ring is the fitting to check.
Before You Decide
Check that your saw accepts a 216 mm blade, confirm the arbor size, and make sure the included reduction ring matches your machine if needed. The 80T fine-cut format and 2.4 mm kerf make this a blade to compare carefully against the finish and fitting you want.
