Quick Summary
The KAISAL is a 35A charger for 48V (51.2V) LiFePO4 batteries. It is described as compatible with 16-cell batteries and has a three-stage charging process, a built-in cooling fan and a tri-colour LED charge indicator. The title also gives an IP67 rating.
Key Details
| Detail | Product information and buyer relevance |
|---|---|
| Battery type and voltage | For 48V (51.2V) LiFePO4 batteries; check the battery’s chemistry and voltage. |
| Cell count | Compatibility is stated for 16-cell batteries. |
| Charging current | 35A. |
| Output power | 2000W is stated in the description. |
| Charging stages | Precharge, constant-current charging and constant-voltage charging. |
| BMS activation | Can activate a battery management system (BMS) when a battery is in standby after deep discharge and its output voltage is 0V. This function is not described as repairing physical battery damage. |
| Connections | The description names an Anderson 50A plug on the DC output, M8 connectors and alligator clips. Check which connectors and leads are supplied and suit the battery. |
| Other features | Built-in fan, tri-colour LED charge indicator and an IP67 rating stated in the title. |
| Power cord and fixing | A 2m power cord and a screw fixing at the bottom are described for installation on a wall or another surface. |
| Protection features | Listed protections include over-voltage, over-current, reverse polarity, overheating and short circuit protection, plus automatic shutdown after 15 hours. |
Key Features Explained
The charger is described as using three stages: low-current precharge, higher-current constant-current charging, then low-current constant-voltage charging. The description says the charging process is checked automatically; these details do not establish a guaranteed charging time or battery-life outcome.
The BMS activation function is intended for a battery that has entered standby after deep discharge and shows 0V output. The description says it cannot restore a battery with physical damage, such as a short circuit, leakage or capacity loss after deep discharge.
Compatibility, Size and Fit
Check that the battery is a 16-cell, 48V (51.2V) LiFePO4 type. Match the charger’s DC connection to the battery terminals and confirm that the connector arrangement is suitable before choosing this charger.
What to Compare Before Buying
- Battery specification: Confirm the battery chemistry, voltage and cell count against the stated 48V (51.2V), 16-cell LiFePO4 compatibility.
- Connection: Check whether the Anderson 50A plug, M8 connectors or alligator clips match your battery, and confirm which leads are included in the selected configuration.
- Charging requirements: Compare the stated 35A current and 2000W output with the battery manufacturer’s charging requirements.
- Installation: Allow for the 2m power cord and check whether the described bottom screw fixing suits the intended mounting position.
Important Limitations
The BMS activation function is not a repair for physical battery damage. The description’s claimed charge time for a 48V 100Ah battery is not included here as a guaranteed result. Follow the battery and charger instructions for operation; the listed protection features do not replace those instructions.
Before You Decide
Confirm the battery’s chemistry, voltage and cell count, then check that the DC connector and supplied leads match. Also consider the stated 35A charging current, 2m power cord and installation arrangement.










