Quick Summary
Kretrum 3D Pen Filament Refills are 1.75 mm PLA filament refills in 40 colours, with 3 metres per colour and 120 metres in total. They are described as compatible with MYNT3D and SCRIB3D 3D pens, as well as 3D printers with 1.75 mm nozzles.
The pack also includes a clear fit warning for 3Doodler Start pens, which are not compatible.
Who It Is Best For
This set suits buyers who want a multi-colour supply of 1.75 mm filament for a compatible 3D pen or a 3D printer with a 1.75 mm nozzle. It is also relevant if you want a larger colour range for artistic work.
Key Details
| Detail | Verified information and buyer relevance |
|---|---|
| Brand | Kretrum. |
| Product type | 3D pen filament refills. |
| Filament type | PLA filament. |
| Diameter | 1.75 mm, so it is intended for compatible 1.75 mm pens or nozzles. |
| Colour count | 40 colours for a wide choice of shades. |
| Length | 3 metres per colour, 120 metres in total. |
| Compatibility | Compatible with MYNT3D and SCRIB3D 3D pens, and with 3D printers with 1.75 mm nozzles. |
| Incompatible item | Not suitable for 3Doodler Start pens. |
| Recommended temperature | 356 °F to 410 °F, or 180 °C to 210 °C. |
Why Buyers Choose It
- 40 colours and 120 metres total give a broad colour selection for projects that need variety.
- 3 metres per colour makes it easier to use different shades without a large amount of one colour left over.
- 1.75 mm diameter helps buyers check fit against their pen or nozzle before ordering.
- The stated 3Doodler Start exclusion makes compatibility clearer for shoppers comparing pen types.
What To Know Before You Buy
Check that your pen or printer uses 1.75 mm filament before ordering. This set is compatible with MYNT3D and SCRIB3D 3D pens and with 1.75 mm nozzles, but it is not suitable for 3Doodler Start pens. If you are buying for artistic work, the colour mix may be useful because it includes 25 popular colours, 3 transparent colours, 3 fluorescent colours, 6 glittering colours and 3 bright colours.
The stated recommended printing temperature is 356 °F to 410 °F, or 180 °C to 210 °C.
Common Buyer Questions
Is this for standard 3D pens?
It is compatible with MYNT3D and SCRIB3D 3D pens, and with 3D printers that use 1.75 mm nozzles.
Will it fit a 3Doodler Start pen?
No. It is stated as not suitable for 3Doodler Start pens.
How much filament is included?
You get 3 metres per colour and 120 metres in total across 40 colours.
What temperature range is stated?
The recommended printing temperature is 356 °F to 410 °F, or 180 °C to 210 °C.
Final Buying View
If you need a 1.75 mm PLA refill set with a wide range of colours, this Kretrum pack gives you a clear specification to check against your pen or printer. Confirm the 1.75 mm fit and the 3Doodler Start exclusion before ordering.
