Quick Summary
Likesilk ABS Filament is a 1.75mm 3D printer filament supplied on a 1kg spool. It is described as having dimensional accuracy of +/- 0.02mm, which is a useful check for buyers looking for consistent filament size.
The filament is intended for ABS printing and the supplied guidance notes a printing temperature of 240-260 ℃ and a hot bed temperature of 90-100 ℃. A closed and sealed printer environment is also noted for better results.
Who It Is Best For
This filament suits buyers who already use ABS filament and want a 1.75mm option with a stated accuracy tolerance. It is also relevant if you need a 1kg spool for printing parts where the listed ABS properties and print settings matter.
Key Details
| Detail | Verified information and buyer relevance |
|---|---|
| Brand | Likesilk, for identifying the filament line. |
| Product type | ABS filament for a 3D printer. |
| Filament diameter | 1.75mm, which must match your printer’s filament requirement. |
| Dimensional accuracy | +/- 0.02mm, a useful consistency detail when comparing filament options. |
| Spool size | 1kg spool, also stated as 2.2 lbs. |
| Colour | Yellow, as shown in the product identifier. |
| Printing temperature | 240-260 ℃, for buyers checking their printer settings. |
| Hot bed temperature | 90-100 ℃, an important setup check before printing. |
| Printing environment | A closed and sealed environment is noted for better results with ABS. |
Why Buyers Choose It
- The stated 1.75mm diameter helps buyers confirm compatibility with printers that use this filament size.
- The +/- 0.02mm accuracy figure gives a clearer idea of the stated filament consistency.
- The 1kg spool size gives a straightforward quantity check before ordering.
- The listed ABS print temperatures and closed-environment note help buyers match their printer setup to the filament.
What To Know Before You Buy
Check that your printer is set up for 1.75mm filament before ordering. The listed printing temperature, hot bed temperature and closed-environment note are important if you want to use the filament as intended. The product identifier also shows Yellow, so make sure that is the colour you need.
Common Buyer Questions
What size filament is this?
It is 1.75mm filament, so it should be matched with a printer that uses that size.
How much filament is on the spool?
The spool size is stated as 1kg, or 2.2 lbs.
What temperatures are listed for printing?
The listed printing temperature is 240-260 ℃ and the hot bed temperature is 90-100 ℃.
Does it need a special printing environment?
A closed and sealed environment is noted for better ABS printing results.
Final Buying View
If you need 1.75mm ABS filament in Yellow, this spool gives a clear diameter, weight and temperature guidance to check against your printer setup. Confirm the colour, filament size and temperature requirements before ordering.
