Quick Summary
OVERTURE Nylon Filament is a 1.75mm 3D printer consumable supplied on a 1kg spool in black. It is described as polyamide (PA) and is positioned for use with most FDM printers, with dimensional accuracy stated at +/- 0.03mm in the title.
The description also refers to it as CoPA filament and gives a 1kg spool weight, which makes it important to check the exact filament diameter and printer suitability before ordering.
Who It Is Best For
This filament is aimed at buyers looking for a 1.75mm nylon-based print material for an FDM 3D printer. It will suit anyone who wants a black spool in the stated size and quantity, and who wants to confirm printer compatibility before use.
Key Details
| Detail | Verified information and buyer relevance |
|---|---|
| Brand | OVERTURE. |
| Product type | Nylon filament / 3D printer consumable for FDM printers. |
| Filament diameter | 1.75mm, so it must match the printer’s supported filament size. |
| Colour | Black. |
| Quantity | 1kg spool, also shown as 2.2lbs, which helps when planning print volume. |
| Dimensional accuracy | +/- 0.03mm in the title, a useful check for buyers who want a tightly specified filament size. |
| Material | Polyamide (PA), with the description also referring to CoPA and Nylon 6 / Nylon 6.6. |
| Compatibility | Fit most FDM printers, so the printer’s filament requirements should still be checked. |
What To Know Before You Buy
Check that your printer uses 1.75mm filament and is suitable for nylon-based material before ordering. The listing also mentions a 1kg spool, black colour, and a stated dimensional accuracy of +/- 0.03mm, so these are the main details to confirm against your needs.
The description refers to drying before vacuum packaging, moisture sensitivity, and re-sealing after use. It also mentions that PVA glue is always required for better adhesion, so buyers should factor that into their setup.
Common Buyer Questions
Will this fit my 3D printer?
It is described as fitting most FDM printers, but you should confirm that your printer uses 1.75mm filament.
What material is it?
It is listed as polyamide (PA), and the description also refers to Nylon and CoPA filament.
How much filament is on the spool?
It is a 1kg spool, also shown as 2.2lbs.
Is there anything to check before printing?
Yes, the description says nylon is sensitive to moisture and refers to re-sealing the bag after use, plus PVA glue for better adhesion.
Final Buying View
Choose this spool if you need black 1.75mm nylon filament in the stated 1kg size and your printer supports the format. Review filament size, printer compatibility, and the adhesive or storage notes before ordering.
