Quick Summary
The Pennle Universal USB to 5V DC Charging Power Cable is a replacement charging lead for devices that use a USB connection to a 5V DC round-hole connector. It is described as 1 m long and uses a 3.5 mm x 1.35 mm round hole head, with up to 1 A current support.
This cable is presented for use with compatible low-power devices, including some electric toothbrush models and other small appliances. Before buying, check the connector size, voltage requirement and current draw against your device.
Key Details
| Detail | Verified information and buyer relevance |
|---|---|
| Product type | USB to 5V DC charging power cable. This is a replacement lead rather than a complete device. |
| Length | 1 m. Check whether that reach suits your charging or power setup. |
| Connector | 3.5 mm x 1.35 mm round hole head. The connector must match the device socket. |
| Voltage | 5V. Match this to the device’s charging requirement. |
| Current | Up to 1 A. The connected device should stay within this limit. |
| Wire gauge | 24AWG wire gauge. This is a specification to compare if cable construction matters to you. |
What to Compare Before Buying
- Connector size: The cable uses a 3.5 mm x 1.35 mm round hole head. Check that your device takes the same plug type.
- Power requirement: It is for 5V devices. Compare that with the charging or power input your device needs.
- Current limit: The stated current support is up to 1 A. Make sure your device stays within that figure.
- Cable length: The lead is 1 m long. Check whether that is long enough for your intended placement.
Compatibility, Size and Fit
The cable is described for some Fairywill electric toothbrush models, including FW917, FW508, FW507, FWP11, FWD1 and FWD3, plus Bitvae D2 and Seago 7AM2M. It is also described for hub splitters, routers, LED lights, small fans and similar low-power appliances.
Because compatibility depends on the exact socket and power requirements, check the model, connector size and voltage before choosing a lead. A different connector or power rating will not be a match.
Before You Decide
Confirm that your device uses a 3.5 mm x 1.35 mm round-hole connector and needs 5V charging. Check the 1 m length against the space between your power source and device. If your equipment draws more than 1 A or uses a different plug, this lead will not be suitable.
