Quick Summary
The PENYUY 420 ml hydrogen water bottle combines a borosilicate glass bottle with an SPE electrolysis generator. Its listed cycle takes three minutes, and the built-in 1000 mAh battery is stated to provide up to 10 uses per charge.
Key Details
| Detail | Product information and buyer relevance |
|---|---|
| Capacity | 420 ml per fill. |
| Bottle material | Borosilicate glass. |
| Generation method | SPE electrolysis, started with a button. |
| Cycle time | Three minutes per cycle. |
| Power | Built-in 1000 mAh USB-rechargeable battery; stated use is up to 10 cycles per full charge. |
| Charging time | Listed as 2 to 3 hours. |
| Weight | Approximately 400 g. |
What to Compare Before Buying
- Capacity: Consider whether 420 ml is enough for the amount you want to carry between refills.
- Charging: Allow 2 to 3 hours for charging and consider whether up to 10 stated uses per charge suits your routine.
- Construction: The bottle is made from glass, so consider whether that material suits how you plan to carry it.
Setup and Correct Use
Fill the bottle to around 80% with water, then press the button to start the three-minute cycle. Use water only: do not add other liquids, including juice, milk or tea, and do not use water above 50°C. Keep the bottle upright to reduce the risk of leaks.
Care, Cleaning and Storage
The bottle detaches for cleaning. Clean the generator once or twice before first use, and rinse the base gently without soaking it.
Before You Decide
Check that the 420 ml capacity, glass construction and charging routine suit your needs. Observe the water-only and temperature limits, and keep the bottle upright.
