Quick Summary
Polymaker Fiberon PA6-GF is a 1.75mm grey nylon filament for 3D printing, supplied in a 500g spool. It is described as a glass fibre-reinforced Nylon 6 filament with a focus on high-speed printing and compatibility with most mainstream and entry-level printers.
The material is presented as stiff, strong and heat resistant, with good layer adhesion. It is also packaged with a resealable ziplock bag, a desiccant, and a cardboard spool with an enhanced hard edge.
Who It Is Best For
This filament is aimed at buyers looking for a composite nylon material for printed parts where torsional, tensile and impact strength are important. It is also relevant for users who want a 1.75mm filament format and a 500g spool size.
Key Details
| Detail | Verified information and buyer relevance |
|---|---|
| Brand | Polymaker, identifying the filament line. |
| Product line | Fiberon PA6-GF, a glass fibre-reinforced Nylon 6 filament. |
| Filament diameter | 1.75mm, so it should be checked against your printer’s filament requirement. |
| Colour | Grey. |
| Spool size | 500g, which affects how much filament is available for a print run. |
| Packaging | Supplied with a cardboard spool and box, plus a resealable ziplock bag and desiccant. |
| Stated material characteristics | Stiff, strong and heat resistant, with good layer adhesion. |
| Stated use focus | Optimised for high-speed printing and described as compatible with most mainstream and entry-level printers. |
Why Buyers Choose It
- The glass fibre-reinforced Nylon 6 construction is linked to parts where torsional, tensile and impact strength matter.
- The 1.75mm format makes it relevant for printers that use that filament size.
- The resealable bag and desiccant help keep the filament stored together after opening.
- The cardboard spool with enhanced hard edge adds a specific packaging detail that some buyers will want to check.
What To Know Before You Buy
Confirm that your printer uses 1.75mm filament before ordering. The spool is 500g, so check that this amount suits your project needs. If you are buying for a specific application, review the stated strength, heat resistance and printer compatibility details against your intended use.
Pros: It combines a glass fibre-reinforced Nylon 6 filament with a 1.75mm format and practical resealable packaging.
Cons: The 500g spool size may be smaller than some buyers expect for larger print projects.
Common Buyer Questions
Is this a 1.75mm filament?
Yes. It is listed as 1.75mm, so it is intended for printers that use that filament diameter.
What colour is it?
It is grey.
How much filament is on the spool?
The spool is 500g, which is the stated quantity supplied.
What type of material is it?
It is described as a glass fibre-reinforced Nylon 6 filament.
Final Buying View
Polymaker Fiberon PA6-GF is a 1.75mm grey nylon filament for buyers who want a composite 3D printing material with stated strength-focused properties. Check printer compatibility, filament diameter and spool quantity before ordering.
