Quick Summary
Polymaker PE01001 PolyLite ABS Filament is a 1.75mm black filament supplied as 1000g, and it is described as a low-odour ABS option. It is presented as a material for 3D printing where durability and high temperature resistance matter.
The product description also notes a Vicat Softening Temperature of 104˚C, plus printing guidance for nozzle, bed, speed, cooling fan and bed surface. If you are comparing filaments, check that your printer setup suits ABS use, including a heat-bed and a suitable printing surface.
Who It Is Best For
This filament is aimed at buyers looking for ABS material for 3D printing, especially when they want a 1.75mm black filament in a 1000g spool. It also suits anyone checking printing requirements before choosing ABS, since the listed settings and bed surface guidance are part of the buying decision.
Key Details
| Detail | Verified information and buyer relevance |
|---|---|
| Brand | Polymaker. |
| Product code | PE01001. |
| Product type | PolyLite Filament ABS. |
| Filament diameter | 1.75mm, which needs to match the printer setup. |
| Weight | 1000g, so buyers can judge the amount of filament supplied. |
| Colour | Black. |
| Odour note | Geruchsarm, meaning low odour as stated in the title. |
| Softening temperature | Vicat Softening Temperature: 104˚C. |
| Printing guidance | Nozzle 245˚C to 265˚C, bed 90˚C to 100˚C, speed 30mm/s to 50mm/s. |
| Bed surface and cooling | BuildTak, PEI sheet with ABS slurry, cooling fan LOW for better surface quality or OFF for better strength. |
Why Buyers Choose It
- 1.75mm diameter and 1000g weight give a clear specification for printer compatibility and spool size planning.
- Vicat Softening Temperature of 104˚C gives a concrete heat-resistance figure to compare against your intended use.
- Low-odour ABS wording may matter if you are comparing it with other ABS options for indoor printing.
- The listed nozzle, bed and cooling guidance helps you check whether your printer setup can be matched to the filament.
How It Works
- Use the filament in a printer that suits 1.75mm ABS.
- Set the nozzle within 245˚C to 265˚C.
- Set the bed within 90˚C to 100˚C.
- Use a suitable bed surface such as BuildTak or PEI sheet with ABS slurry.
- Use the cooling fan LOW for better surface quality or OFF for better strength.
- Follow the note to pass the filament through the fixed hole after use to avoid tangles.
Real World Use
The filament is presented for printed parts where durability or high temperature resistance is important. The note about a heat-bed and proper printing surface is especially relevant if you want to avoid warping, and the guidance also says larger parts are prone to warp in domestic printers.
The packaging is described as vacuum-sealed, resealable, and supplied with desiccant in a sealed box. It is also described as having a fully recycled cardboard spool and box.
What To Know Before You Buy
Check that your printer supports 1.75mm ABS and that you can use a heat-bed with a suitable printing surface before ordering. The listed temperature range, speed guidance and cooling recommendations are part of the practical setup for this filament.
Be aware of the stated note that ABS odor is stronger than PLA and that larger prints are prone to warping in domestic printers. If your project needs outdoor UV resistance, this product text points buyers towards ASA instead.
Common Buyer Questions
Is this 3D printer filament 1.75mm?
Yes, the listed filament diameter is 1.75mm.
What colour is it?
It is black.
How much filament is included?
It is supplied as 1000g.
What temperatures are listed for printing?
The nozzle is listed at 245˚C to 265˚C and the bed at 90˚C to 100˚C.
Does it need a heated bed?
Yes, the note says 1.75 ABS filament requires a heat-bed and a proper printing surface to help avoid warping.
Final Buying View
Polymaker PE01001 PolyLite ABS Filament gives you a clearly defined 1.75mm black ABS spool with 1000g of material and specific printing guidance. Review the diameter, temperature settings and bed requirements against your printer before choosing it.
It is most relevant if you want ABS and are prepared for the stated setup needs, including heat-bed use and attention to warping on larger parts.
