Quick Summary
The Rodison overhead desk camera mount is a clamp-based boom arm stand with 1/4" screws for devices that use that fitting. It is set up for overhead positioning and adjustable angles, making it a practical support for cameras, webcams, microphones, ring lights, LED video lights and projectors that match the connection type.
The boom reaches 30.9 inches and the first section adjusts from 21.4 cm to 29.4 cm. If you need a desk-mounted arm, check the device connection, the space available on your desk edge and whether the working height and reach suit your setup.
Key Details
| Detail | Verified information and buyer relevance |
|---|---|
| Product type | Overhead desk camera mount with boom arm. |
| Connection | 1/4" screws for devices that use a 1/4" thread. |
| Reach | Boom extends up to 78.4 cm (30.9 inches), which affects how far the device can sit from the clamp point. |
| Height adjustment | First section adjusts from 21.4 cm to 29.4 cm. |
| Movement | Double ball joint design with 360° adjustment and poles adjustable up to 240°. |
| Clamp opening | Clamp base opens up to 5.79 cm. |
| Maximum load | Supports up to 6.6 lbs (3 kg) horizontally. |
| Construction | Thickened carbon steel metal construction with padded clamp contact points. |
What to Compare Before Buying
- Connection type: This stand uses 1/4" screws, so the mounted device needs the same fitting.
- Reach and height: Compare the 30.9 inch boom length and 21.4 cm to 29.4 cm height adjustment with your desk layout.
- Clamp opening: The base opens to 5.79 cm, so check your desk or surface thickness before choosing.
- Load limit: The stated horizontal limit is 3 kg, so the mounted item should stay within that figure.
- Movement range: The 360° and 240° adjustment points help determine whether the arm can be positioned where you need it.
Compatibility, Size and Fit
This mount is intended for devices with a 1/4" thread, including DSLR cameras, webcams, ring lights, LED video lights, projectors and microphones. Exact fit still depends on the device’s threaded mounting point and the space available around the desk edge. The clamp opens to 5.79 cm, so the surface thickness matters as much as the device itself.
Before You Decide
Confirm the 1/4" thread fit, the desk thickness and the 3 kg horizontal load limit before choosing this mount. The boom length and angle adjustment are the main practical factors for overhead positioning. If your device uses a different mounting thread or your desk is thicker than the clamp opening allows, a different stand is needed.
